User`s guide
Table Of Contents
- Manuals for the Machine
- How This Manual Is Organized
- Contents
- Preface
- How to Use This Manual
- Legal Notices
- Basic Copying Features
- Special Copying Features
- Customizing Settings
- Copy Settings Table
- Specifying Copy Settings
- Image Direction Priority
- Auto Orientation
- Standard Image Quality
- Standard Density
- Standard Zoom Ratio
- Standard Copy Quantity
- Auto Collate
- Standard Two-Sided Copying
- Standard Frame Erase
- Standard Two-Page Separation
- Paper Drawer Selection
- Sharpness
- Paper Size Group
- Frame Erase Width Unit of Measurement
- Restoring the Default Copy Settings
- Appendix
Collating Copies
1-45
Basic Copying Features
1
4
Press [Start].
When the original is placed on the platen glass, follow the instructions that
appear on the LCD display.
Copying starts.
NOTE
•
If you place the original on the platen glass of the iR2016 model, or if the machine
cannot detect the original size, specify the original size after pressing [Start].
Press [ ] or [ ] to select the size
➞
press [Start].
•
To cancel this setting, press / [Collate/Staple] repeatedly until the collate
indicator turns off.
•
To cancel all settings and return the machine to the Standby display, press
[Reset].
Page Order Staple
IMPORTANT
Pull out the output auxiliary tray when stapling paper larger than A4.
1
Place your originals.
2
Press / [Collate/Staple] repeatedly until the indicator
for the Staple function lights.
NOTE
If <AUTO COLLATE> is set to ‘COLLATE’ or ‘STAPLE’, the Offset Collate or Staple
mode is automatically set when you place the originals into the feeder. (See “Auto
Collate,” on p. 3-15.)
ORIGINAL SIZE
A4