User`s guide
Table Of Contents
- Manuals for the Machine
- How This Manual Is Organized
- Contents
- Preface
- How to Use This Manual
- Legal Notices
- Basic Copying Features
- Special Copying Features
- Customizing Settings
- Copy Settings Table
- Specifying Copy Settings
- Image Direction Priority
- Auto Orientation
- Standard Image Quality
- Standard Density
- Standard Zoom Ratio
- Standard Copy Quantity
- Auto Collate
- Standard Two-Sided Copying
- Standard Frame Erase
- Standard Two-Page Separation
- Paper Drawer Selection
- Sharpness
- Paper Size Group
- Frame Erase Width Unit of Measurement
- Restoring the Default Copy Settings
- Appendix
Two-Page Separation
2-3
Special Copying Features
2
1
Place your original on the platen glass.
To make copies in the correct page order, begin copying from the first open page
of the book or bound original. Place your original face down, making sure that its
top edge is aligned with the back edge of the platen glass (by the arrow in the
top left corner).
2
Press [Two-Page Separation].
3
Press [ ] or [ ] to select ‘ON’ ➞ press [OK].
An asterisk (*) appears on the LCD display indicating that the Two-Page
Separation mode is set.
NOTE
If the message <NO APPROPRIATE SIZE> appears, no paper of the appropriate
size is set in the paper drawer and stack bypass. Set the paper of the size that
appears on the LCD display. If you press [Start] without loading the paper, the
machine automatically selects the paper with the narrowest margin, and starts
copying.
2-PAGE SEPARATION
OFF
2-PAGE SEPARATION
ON