User`s guide
Table Of Contents
- Manuals for the Machine
- How This Manual Is Organized
- Contents
- Preface
- How to Use This Manual
- Legal Notices
- Basic Copying Features
- Special Copying Features
- Customizing Settings
- Copy Settings Table
- Specifying Copy Settings
- Image Direction Priority
- Auto Orientation
- Standard Image Quality
- Standard Density
- Standard Zoom Ratio
- Standard Copy Quantity
- Auto Collate
- Standard Two-Sided Copying
- Standard Frame Erase
- Standard Two-Page Separation
- Paper Drawer Selection
- Sharpness
- Paper Size Group
- Frame Erase Width Unit of Measurement
- Restoring the Default Copy Settings
- Appendix
Frame Erase
2-8
Special Copying Features
2
4
Press [ ] or [ ] to select the size of the original ➞ press
[OK].
You can select from A3, A4R, A4, A5R, and A5.
5
Press [ ] or [ ] to set the frame erase width for all four
borders ➞ press [OK].
You can also use - [numeric keys] to enter the frame erase width, and
[Clear] to clear your entry.
The Standby display appears and an asterisk (*) appears on the LCD display
indicating that the Frame Erase mode is set.
NOTE
•
You can set the original frame erase width from 1 mm to 50 mm (1/16" to 1 15/16").
•
The default setting is 4 mm (1/8").
•
If you are using the numeric keys to enter the value, be sure to enter a leading zero
to specify one-digit value. (e.g., If you want to specify “4 mm,” enter as “04 mm.”)
6
Press - [numeric keys] to enter the desired copy
quantity (1 to 99).
ORIGINAL SIZE
A4
ª
0 9
ALL FR.SAME WD
4mm
ª
0 9
100% * AUTO A4
A TEXT
O5