User`s guide
Table Of Contents
- Manuals for the Machine
- How This Manual Is Organized
- Contents
- Preface
- How to Use This Manual
- Legal Notices
- Basic Copying Features
- Special Copying Features
- Customizing Settings
- Copy Settings Table
- Specifying Copy Settings
- Image Direction Priority
- Auto Orientation
- Standard Image Quality
- Standard Density
- Standard Zoom Ratio
- Standard Copy Quantity
- Auto Collate
- Standard Two-Sided Copying
- Standard Frame Erase
- Standard Two-Page Separation
- Paper Drawer Selection
- Sharpness
- Paper Size Group
- Frame Erase Width Unit of Measurement
- Restoring the Default Copy Settings
- Appendix
![](/manual/canon/ir2016/user-s-guide-english/images/img-67.png)
Frame Erase
2-11
Special Copying Features
2
5
Press [ ] or [ ] to set the frame erase width for the
center of the bound original ➞ press [OK].
The Standby display appears, and an asterisk (*) appears on the LCD display
indicating that the Book Frame Erase mode is set.
NOTE
•
You can set the frame erase width for the center of the bound original in the range
from 1 mm to 50 mm (1/16" to 1 15/16").
•
The default setting is 10 mm (3/8").
•
If you are using the numeric keys to enter the value, be sure to enter a leading zero
to specify one-digit value. (e.g., If you want to specify “4 mm,” enter as “04 mm.”)
6
Press - [numeric keys] to enter the desired copy
quantity (1 to 99).
NOTE
•
For more information about entering the copy quantity, see “Specifying the
Required Number of Copies,” on p. 1-24.
•
The paper size is displayed according to the original size you have selected in
step 3.
7
Press [Start].
Copying starts.
NOTE
•
To cancel all settings and return the machine to the Standby display, press
[Reset].
•
To cancel copy jobs, see “Canceling a Copy Job,” on p. 1-19.
ERASE WIDTH CNTR
10mm
¨
0 9
100% * AUTO A4
A TEXT
O5