User`s guide
Table Of Contents
- Manuals for the Machine
- How This Manual Is Organized
- Contents
- Preface
- How to Use This Manual
- Legal Notices
- Basic Copying Features
- Special Copying Features
- Customizing Settings
- Copy Settings Table
- Specifying Copy Settings
- Image Direction Priority
- Auto Orientation
- Standard Image Quality
- Standard Density
- Standard Zoom Ratio
- Standard Copy Quantity
- Auto Collate
- Standard Two-Sided Copying
- Standard Frame Erase
- Standard Two-Page Separation
- Paper Drawer Selection
- Sharpness
- Paper Size Group
- Frame Erase Width Unit of Measurement
- Restoring the Default Copy Settings
- Appendix
2 on 1 Combination
2-17
Special Copying Features
2
IMPORTANT
You cannot use Auto Paper Selection in the 2 on 1 Combination mode.
NOTE
The machine automatically selects the copy ratio depending on the selected paper
size. However, you can also set the copy ratio using the preset ratio or zoom by
percentage mode.
6
Press - [numeric keys] to enter the desired copy
quantity (1 to 99).
NOTE
For more information about entering the copy quantity, see “Specifying the
Required Number of Copies,” on p. 1-24.
7
Press [Start].
If the original is placed on the platen glass, follow the instructions that appear on
the LCD display ➞ press [Start] once for each original. When scanning is
complete, press [OK].
If you are copying in the Collate, Offset Collate, or Staple mode, copying starts
when scanning of all pages to be copied is complete.
Otherwise, copying starts when enough pages to make 2 on 1 Combination copy
have been scanned.
NOTE
•
To cancel all settings and return the machine to the Standby display, press
[Reset].
•
To cancel copy jobs, see “Canceling a Copy Job,” on p. 1-19.
0 9
100% * A3
A TEXT
O5