User`s guide
Table Of Contents
- Manuals for the Machine
- How This Manual Is Organized
- Contents
- Preface
- How to Use This Manual
- Legal Notices
- Basic Copying Features
- Special Copying Features
- Customizing Settings
- Copy Settings Table
- Specifying Copy Settings
- Image Direction Priority
- Auto Orientation
- Standard Image Quality
- Standard Density
- Standard Zoom Ratio
- Standard Copy Quantity
- Auto Collate
- Standard Two-Sided Copying
- Standard Frame Erase
- Standard Two-Page Separation
- Paper Drawer Selection
- Sharpness
- Paper Size Group
- Frame Erase Width Unit of Measurement
- Restoring the Default Copy Settings
- Appendix
Different Size Originals
2-18
Special Copying Features
2
Different Size Originals
The Different Size Originals mode enables you to copy different size originals with
the same or different width together.
IMPORTANT
•
If your machine is the iR2016 model, the Feeder (DADF-P1) should be attached to use
this mode.
•
If paper of the same size as the original is not loaded in the paper drawer or stack
bypass, the machine automatically reduces, enlarges, or separates the copied image to
fit the paper loaded in the paper drawer or stack bypass.
•
The Different Size Originals mode cannot be used with the following modes:
- Two-Page Separation
- 2 on 1 Combination
- Original Frame Erase
- Book Frame Erase
- Binding Hole Erase
- Book to 2-Sided
•
Make sure that the different size originals are of the same weight (paper type).
•
Set different size originals in the following combinations. Other combinations may
damage the originals.
- A3 and A4 or A4R and A5.
•
Align the top edge of the originals with the back edge of the feeder or the platen glass if
you are placing originals with different widths. (“Width” refers to the vertical measurement
of the paper from the front of the machine to the back of the machine when the paper is
placed in the feeder or the platen glass.)
•
If you place originals with different widths into the feeder, the originals may move slightly
when fed to the platen glass. As a result, the images may be scanned as slanted.
•
If the Different Size Originals mode is set, the scanning speed may be slower than
normal.
•
If the Different Size Originals mode is set in combination with the Auto Paper Selection
mode, Auto Orientation is not performed.