User`s guide
Table Of Contents
- Manuals for the Machine
- How This Manual Is Organized
- Contents
- Preface
- How to Use This Manual
- Legal Notices
- Basic Copying Features
- Special Copying Features
- Customizing Settings
- Copy Settings Table
- Specifying Copy Settings
- Image Direction Priority
- Auto Orientation
- Standard Image Quality
- Standard Density
- Standard Zoom Ratio
- Standard Copy Quantity
- Auto Collate
- Standard Two-Sided Copying
- Standard Frame Erase
- Standard Two-Page Separation
- Paper Drawer Selection
- Sharpness
- Paper Size Group
- Frame Erase Width Unit of Measurement
- Restoring the Default Copy Settings
- Appendix
Different Size Originals
2-19
Special Copying Features
2
NOTE
•
If the Different Size Originals mode is used with the 1 to 2-Sided mode and the originals
for the front and back sides of a two-sided copy are different in size, the copies are output
as one-sided copies on paper of their respective sizes.
•
You can use the stack bypass for the Auto Paper Selection when:
- The paper is loaded in the stack bypass
- The paper size is specified in <BYPASS STD SET> in the <COMMON SETTINGS>
menu
- The Auto Paper Selection is set to ‘ON’ for the stack bypass in <COPY> of <AUTO
DRAWER SELCT> in the <COMMON SETTINGS> menu
1
Place your originals.
IMPORTANT
If your model is the iR2016, place your originals in the feeder to use the Different
Size Originals mode.
2
Press [Different Size Originals].
3
Press [ ] or [ ] to select ‘SAME WIDTH’ or ‘DIFFERENT
WIDTH’ ➞ press [OK].
An asterisk (*) appears on the LCD display indicating that the Different Size
Originals mode is set.
100% AUTO A4
A TEXT
O1
DIFFER. SIZE ORIG
OFF
DIFFER. SIZE ORIG
SAME WIDTH