User`s guide
Table Of Contents
- Manuals for the Machine
- How This Manual Is Organized
- Contents
- Preface
- How to Use This Manual
- Legal Notices
- Basic Copying Features
- Special Copying Features
- Customizing Settings
- Copy Settings Table
- Specifying Copy Settings
- Image Direction Priority
- Auto Orientation
- Standard Image Quality
- Standard Density
- Standard Zoom Ratio
- Standard Copy Quantity
- Auto Collate
- Standard Two-Sided Copying
- Standard Frame Erase
- Standard Two-Page Separation
- Paper Drawer Selection
- Sharpness
- Paper Size Group
- Frame Erase Width Unit of Measurement
- Restoring the Default Copy Settings
- Appendix
Two-Sided Copying
2-27
Special Copying Features
2
2 to 1-Sided
This mode automatically turns over two-sided originals to make one-sided copies
on different sheets of paper.
IMPORTANT
Make sure to place originals with a horizontal (landscape) orientation, such as A4R and
A5R, horizontally. If these originals are placed vertically, the back side of the copy is
copied upside down.
NOTE
If the feeder is attached, it is recommended that you set the originals in the feeder when
copying in 2 to1-Sided mode. This enables you to automatically scan the front and back
sides of the originals without the need to turn over and re-feed the originals.
1
Place your originals ➞ press [Two-Sided].
If necessary, see the screen shot in step 2 of “1 to 2-Sided,” on p. 2-21.
2
Press [ ] or [ ] until ‘2 > 1-SIDED’ appears ➞ press
[OK].
Original Copies
TWO-SIDED
2 > 1-SIDED
¤