User`s guide
Table Of Contents
- Manuals for the Machine
- How This Manual Is Organized
- Contents
- Preface
- How to Use This Manual
- Legal Notices
- Basic Copying Features
- Special Copying Features
- Customizing Settings
- Copy Settings Table
- Specifying Copy Settings
- Image Direction Priority
- Auto Orientation
- Standard Image Quality
- Standard Density
- Standard Zoom Ratio
- Standard Copy Quantity
- Auto Collate
- Standard Two-Sided Copying
- Standard Frame Erase
- Standard Two-Page Separation
- Paper Drawer Selection
- Sharpness
- Paper Size Group
- Frame Erase Width Unit of Measurement
- Restoring the Default Copy Settings
- Appendix
Two-Sided Copying
2-28
Special Copying Features
2
3
Press [ ] or [ ] to set the orientation of the originals
(‘BOOK TYPE’ or ‘CALENDAR TYPE’) ➞ press [OK].
Details of each item are shown below:
The Standby display appears, and an asterisk (*) appears on the LCD display
indicating that the 2 to 1-Sided mode is set.
4
Press [Start].
If the original is placed on the platen glass, follow the instructions that appear on
the LCD display.
Copying starts.
NOTE
•
If you place the original on the platen glass of the iR2016 model, or if the machine
cannot detect the original size, specify the original size after pressing [Start] in
step 5.
Press [ ] or [ ] to select the size
➞
press [Start].
•
To cancel all settings and return the machine to the Standby display, press
[Reset].
•
To cancel copy jobs, see “Canceling a Copy Job,” on p. 1-19.
‘BOOK TYPE’: The front and back sides of the original have the same
top-bottom orientation.
‘CALENDAR TYPE’: The front and back sides of the original have opposite
top-bottom orientations.
TYPE OF ORIGINAL
BOOK TYPE
¤
100% * AUTO A4
A TEXT
O1
ORIGINAL SIZE
A4