User`s guide
Table Of Contents
- Manuals for the Machine
- How This Manual Is Organized
- Contents
- Preface
- How to Use This Manual
- Legal Notices
- Basic Copying Features
- Special Copying Features
- Customizing Settings
- Copy Settings Table
- Specifying Copy Settings
- Image Direction Priority
- Auto Orientation
- Standard Image Quality
- Standard Density
- Standard Zoom Ratio
- Standard Copy Quantity
- Auto Collate
- Standard Two-Sided Copying
- Standard Frame Erase
- Standard Two-Page Separation
- Paper Drawer Selection
- Sharpness
- Paper Size Group
- Frame Erase Width Unit of Measurement
- Restoring the Default Copy Settings
- Appendix
Specifying Copy Settings
3-5
Customizing Settings
3
Image Direction Priority
If <IMAGE DIR PRIORTY> is set to ‘ON’, the machine always copies an image in
the same orientation as the original image. This is because the images on originals
may be copied upside down, depending on the copy mode set.
NOTE
•
The default setting is ‘OFF’.
•
If <IMAGE DIR PRIORTY> is set to ‘ON’, the copy speed is slower than normal.
1
Press [Additional Functions].
2
Press [ ] or [ ] until <COPY SETTINGS> appears ➞
press [OK].
The <COPY SETTINGS> menu appears.
3
Press [ ] or [ ] until <IMAGE DIR PRIORTY> appears ➞
press [OK].
The <IMAGE DIR PRIORTY> menu appears.
ADD. FUNCTIONS
1.COMMON SETTINGS
ADD. FUNCTIONS
1.COMMON SETTINGS
2.COPY SETTINGS
1.IMAGE DIR PRIORTY