User`s guide
Table Of Contents
- Manuals for the Machine
- How This Manual Is Organized
- Contents
- Preface
- How to Use This Manual
- Legal Notices
- Basic Copying Features
- Special Copying Features
- Customizing Settings
- Copy Settings Table
- Specifying Copy Settings
- Image Direction Priority
- Auto Orientation
- Standard Image Quality
- Standard Density
- Standard Zoom Ratio
- Standard Copy Quantity
- Auto Collate
- Standard Two-Sided Copying
- Standard Frame Erase
- Standard Two-Page Separation
- Paper Drawer Selection
- Sharpness
- Paper Size Group
- Frame Erase Width Unit of Measurement
- Restoring the Default Copy Settings
- Appendix
Specifying Copy Settings
3-6
Customizing Settings
3
4
Press [ ] or [ ] to select ‘OFF’ or ‘ON’ ➞ press [OK].
The selected mode is set, and the LCD display returns to the <COPY
SETTINGS> menu.
5
Press [Stop] to return to the Standby display.
Auto Orientation
If <AUTO ORIENTATION> is set to ‘ON’, the machine uses information, such as the
size of the original and the copy ratio, to determine the most suitable orientation for
the specified paper size and then automatically rotates the image, if necessary.
NOTE
•
The default setting is ‘ON’.
•
If A4 or A5 originals are enlarged onto A3 paper, Auto Orientation is not performed even
if you select ‘ON’.
•
Only the images of standard size originals, up to A4 paper, can be rotated when the copy
ratio is set to 100%.
•
If Auto Paper Selection is set and the most suitable paper size is not available, the paper
source that is loaded with paper of the same size, even if the orientation is different, is
displayed as the optimal paper to use.
IMAGE DIR PRIORTY
OFF