Setup guide

Setting Specifications That Are Common to Each Function (Common Settings)
3-8
3-83-8
3-8
Selecting and Storing Settings to Suit your Needs
3
33
3
Setting Specifications That Are Common to
Setting Specifications That Are Common to Setting Specifications That Are Common to
Setting Specifications That Are Common to
Each Function
Each Function Each Function
Each Function
(Common Settings)
(Common Settings)(Common Settings)
(Common Settings)
This section describes how to specify the settings that are common to the Copy, Mail Box, and
Fax.
NOTE
•
••
•
The Common Settings screen is made up of several screens. Use “
t
” or “
s
” to scroll to the desired
screen and make the required settings.
•
••
•
When the “
t
” or “
s
” should be pressed, the indication is displayed in this manual.
Selecting the Initial Function at Power ON
Selecting the Initial Function at Power ONSelecting the Initial Function at Power ON
Selecting the Initial Function at Power ON
You can specify which screen is displayed when you turn on the main power. The System
Monitor screen can also be specified.
NOTE
•
••
•
The default settings are as follows:
- Select Initial Function: Copy
- Set “System Monitor Screen” as initial function: Off
- Set “Device” as the default for “System Monitor”: On
1
11
1
Call up the desired screen as follows:
Call up the desired screen as follows:Call up the desired screen as follows:
Call up the desired screen as follows: