Setup guide

Setting Specifications That Are Common to Each Function (Common Settings)
3-11
3-113-11
3-11
3
33
3
Selecting and Storing Settings to Suit your Needs
Setting Entry Tone, Error Tone, and Job Done Tone
Setting Entry Tone, Error Tone, and Job Done ToneSetting Entry Tone, Error Tone, and Job Done Tone
Setting Entry Tone, Error Tone, and Job Done Tone
You can select whether or not to sound audible tones. The following tones sound at the following
times:
• Entry Tone: When pressing keys on the control panel or keys on the touch panel display.
• Error Tone: When a malfunction occurs (e.g., paper jam or operational error).
• Job Done Tone: After the last copy has been made (e.g., outputting, stapling, or faxing is
completed) .
NOTE
•
••
•
The default setting is “On” for all tones.
1
11
1
Call up the desired screen as follows:
Call up the desired screen as follows:Call up the desired screen as follows:
Call up the desired screen as follows:
2
22
2
Select “On” or “Off” for Entry Tone, Error Tone, and Job Done Tone, and
Select “On” or “Off” for Entry Tone, Error Tone, and Job Done Tone, and Select “On” or “Off” for Entry Tone, Error Tone, and Job Done Tone, and
Select “On” or “Off” for Entry Tone, Error Tone, and Job Done Tone, and
press “OK.”
press “OK.”press “OK.”
press “OK.”
3
33
3
Press “Done.”
Press “Done.”Press “Done.”
Press “Done.”
Repeat this procedure.
The specified mode is set and the display returns to the Basic Features screen.