Setup guide

Setting Specifications That Are Common to Each Function (Common Settings)
3-21
3-213-21
3-21
3
33
3
Selecting and Storing Settings to Suit your Needs
Setting a Dedicated Tray for Each Function
Setting a Dedicated Tray for Each FunctionSetting a Dedicated Tray for Each Function
Setting a Dedicated Tray for Each Function
You can select the function for which each output tray of the Saddle Finisher-G1 (option) or the
Inner 2way Tray-A1 (option) is to be used.
IMPORTANT
•
••
•
This function can only be set when the Inner 2way Tray-A1 is attached.
•
••
•
“Fax” is displayed only when the FAX Board (option) is attached.
NOTE
•
••
•
It is possible to assign a single tray to multiple functions.
•
••
•
The default settings are as follows:
- Tray A: Copy, Printer
- Tray B: Fax, Other
- Tray C: No designation
1
11
1
Call up the desired screen as follows:
Call up the desired screen as follows:Call up the desired screen as follows:
Call up the desired screen as follows:
2
22
2
Select the functions of dedicated output trays A, B, and C, and press “OK.”
Select the functions of dedicated output trays A, B, and C, and press “OK.”Select the functions of dedicated output trays A, B, and C, and press “OK.”
Select the functions of dedicated output trays A, B, and C, and press “OK.”
“Fax” is displayed when the Fax board is attached.
IMPORTANT
•
••
•
When the paper reaches the stacking limit of the tray while Trays A, B, and C are set as the
designated tray for a certain function, the machine automatically changes the output tray to another
available tray.
When the Saddle Finisher-G1 is
When the Saddle Finisher-G1 is When the Saddle Finisher-G1 is
When the Saddle Finisher-G1 is
attached
attachedattached
attached
When the Inner 2way Tray-A1 is
When the Inner 2way Tray-A1 is When the Inner 2way Tray-A1 is
When the Inner 2way Tray-A1 is
attached
attachedattached
attached