Setup guide

Setting the Department ID Management
4-8
4-84-8
4-8
4
44
4
System Manager Settings
5
55
5
Press “Department ID”
Press “Department ID”Press “Department ID”
Press “Department ID” → enter the Department ID with
enter the Department ID with enter the Department ID with
enter the Department ID with
(numeric keys)
(numeric keys)(numeric keys)
(numeric keys) → press “Password”
press “Password”press “Password”
press “Password” → enter the password in the same way.
enter the password in the same way.enter the password in the same way.
enter the password in the same way.
You cannot store a Department ID with only the number <0>, such as <0000000>.
NOTE
•
••
•
When a password is not stored, you can use this machine by entering only the Department ID.
6
66
6
Press “Impression Limit,” and enter the desired value with
Press “Impression Limit,” and enter the desired value with Press “Impression Limit,” and enter the desired value with
Press “Impression Limit,” and enter the desired value with
(numeric keys).
(numeric keys).(numeric keys).
(numeric keys).
NOTE
•
••
•
The number you can set for Impression Limit is from 0 to 999999. Once the Impression Limit is set,
you cannot exceed the number entered.
•
••
•
A two-sided print is counted as <2>.