Setup guide
Setting the Department ID Management
4-12
4-124-12
4-12
4
44
4
System Manager Settings
3
33
3
Use “
Use “Use “
Use “
t
” and “
” and “” and “
” and “
s
” to display the Password you want to change
” to display the Password you want to change” to display the Password you want to change
” to display the Password you want to change → select the
select the select the
select the
Password
PasswordPassword
Password → press “Edit.”
press “Edit.”press “Edit.”
press “Edit.”
4
44
4
Enter the Password with
Enter the Password with Enter the Password with
Enter the Password with (numeric keys), and press “OK.”
(numeric keys), and press “OK.”(numeric keys), and press “OK.”
(numeric keys), and press “OK.”
To change Impression Limit, press “Impression Limit,” and enter the desired value using -
(numeric keys). Then press “OK.”
You cannot store a password with only the number <0>, such as <0000000>.
NOTE
•
••
•
The number you can set for Impression Limit is from 0 to 999999. Once the Impression Limit is set,
you cannot exceed the number entered.
•
••
•
A two-sided print is counted as <2>.
•
••
•
You cannot change the Department IDs.