Setup guide

Setting the Department ID Management
4-14
4-144-14
4-14
4
44
4
System Manager Settings
Erasing the Department ID and Password
Erasing the Department ID and PasswordErasing the Department ID and Password
Erasing the Department ID and Password
The following instructions describe how to erase the Department ID and Password you have
stored.
NOTE
•
••
•
When using Department ID Management with Card Reader-C1, you cannot erase the Department
ID.
1
11
1
Call up the desired screen as follows:
Call up the desired screen as follows:Call up the desired screen as follows:
Call up the desired screen as follows:
When the System Manager ID/Password is set, enter the System Manager ID and System Password
after pressing “System Settings.” Then, press (ID).
2
22
2
Press “On,” and press “Store Dept. ID/Password.”
Press “On,” and press “Store Dept. ID/Password.”Press “On,” and press “Store Dept. ID/Password.”
Press “On,” and press “Store Dept. ID/Password.”
3
33
3
Use “
Use “Use “
Use “
t
” and “
” and “” and “
” and “
s
” to display the Department and its settings that you want to
” to display the Department and its settings that you want to ” to display the Department and its settings that you want to
” to display the Department and its settings that you want to
erase
eraseerase
erase → select the Department
select the Departmentselect the Department
select the Department → press “Erase.”
press “Erase.”press “Erase.”
press “Erase.”