Setup guide
Setting the Department ID Management
4-16
4-164-16
4-16
4
44
4
System Manager Settings
7
77
7
Press “Done.”
Press “Done.”Press “Done.”
Press “Done.”
Repeat this procedure.
When the screen below appears, enter the Department ID and Password.
NOTE
•
••
•
For details of how to enter the Department ID and Password, see ‘Entering the Department ID and
Password,’ on p. 1-37.
Checking and Printing Counter Information
Checking and Printing Counter InformationChecking and Printing Counter Information
Checking and Printing Counter Information
You can display and print a list of the paper count for each department.
1
11
1
Call up the desired screen as follows:
Call up the desired screen as follows:Call up the desired screen as follows:
Call up the desired screen as follows:
When the System Manager ID/Password is set, enter the System Manager ID and System Password
after pressing “System Settings.” Then, press (ID).
2
22
2
Select “On,” and press “Print Totals.”
Select “On,” and press “Print Totals.”Select “On,” and press “Print Totals.”
Select “On,” and press “Print Totals.”