Setup guide

Setting the Department ID Management
4-17
4-174-17
4-17
4
44
4
System Manager Settings
3
33
3
Check or print the print totals count.
Check or print the print totals count.Check or print the print totals count.
Check or print the print totals count.
The print total with the Department ID left blank (not displayed) is the total of prints from a computer
not correspondent with a stored Department ID (unknown ID).
l
If you only want to check the counter:
If you only want to check the counter:If you only want to check the counter:
If you only want to check the counter:
Press “
t
” or “
s
” to display the desired Department, and check the print totals.
l If you want to print the displayed list:
If you want to print the displayed list:If you want to print the displayed list:
If you want to print the displayed list:
Select “Print List.” When the screen below appears, press “Yes.”
If you do not want to print the list, press “No.”
The screen below appears during printing.
NOTE
•
••
•
To cancel printing, press “Cancel.”
•
••
•
To close the screen, press “Done.”