Setup guide

Setting the Department ID Management
4-19
4-194-19
4-19
4
44
4
System Manager Settings
6
66
6
Press “Done.”
Press “Done.”Press “Done.”
Press “Done.”
Repeat this procedure.
When the screen below appears, enter the Department ID and Password.
NOTE
•
••
•
For details of how to enter the Department ID and Password, see ‘Entering the Department ID and
Password,’ on p. 1-37.
Erasing Print Totals
Erasing Print TotalsErasing Print Totals
Erasing Print Totals
The following instructions describe how to delete the print totals made so far, for all departments.
It is also possible to delete print totals for a particular department.
1
11
1
Call up the desired screen as follows:
Call up the desired screen as follows:Call up the desired screen as follows:
Call up the desired screen as follows:
When the System Manager ID/Password is set, enter the System Manager ID and System Password
after pressing “System Settings.” Then, press .
2
22
2
Select “On,” and press “Print Totals.”
Select “On,” and press “Print Totals.”Select “On,” and press “Print Totals.”
Select “On,” and press “Print Totals.”