Setup guide

Setting the Department ID Management
4-23
4-234-23
4-23
4
44
4
System Manager Settings
3
33
3
Select “On” or “Off,” and press “OK.”
Select “On” or “Off,” and press “OK.”Select “On” or “Off,” and press “OK.”
Select “On” or “Off,” and press “OK.”
If you want to print from a computer not correspondent with a stored Department ID, press “On.”
If you do not want to print from a computer not correspondent with a stored Department ID, press “Off.”
4
44
4
Press “Done.”
Press “Done.”Press “Done.”
Press “Done.”
Repeat this procedure.
When the screen below appears, enter the Department ID and Password.
NOTE
•
••
•
For details of how to enter the Department ID and Password, see ‘Entering the Department ID and
Password,’ on p. 1-37.