Setup guide

Periodic Inspection of the Breaker
xxiv
xxivxxiv
xxiv
Periodic Inspection of the Breaker
Periodic Inspection of the BreakerPeriodic Inspection of the Breaker
Periodic Inspection of the Breaker
This machine has a breaker that detects excess current or leakage current. Be sure to test the
breaker once or twice a month using the following procedure.
IMPORTANT
•
••
•
Make sure that the main power is turned ON, and the machine is neither printing nor scanning before starting a periodic
inspection of the breaker.
•
••
•
If a malfunction occurs after a periodic inspection, contact your service representative.
1
11
1
Push the test button with the tip of a ball-point pen, or similar object.
Push the test button with the tip of a ball-point pen, or similar object.Push the test button with the tip of a ball-point pen, or similar object.
Push the test button with the tip of a ball-point pen, or similar object.
IMPORTANT
•
••
•
Briefly push the test button.
NOTE
•
••
•
The breaker is located near the power cord.