Setup guide

Envelope Feeder Attachment-B1
7-24
7-247-24
7-24
7
77
7
Handling Options
3
33
3
Pull out the paper drawer by lifting it, holding the left and right sides of the
Pull out the paper drawer by lifting it, holding the left and right sides of the Pull out the paper drawer by lifting it, holding the left and right sides of the
Pull out the paper drawer by lifting it, holding the left and right sides of the
paper drawer with both hands.
paper drawer with both hands.paper drawer with both hands.
paper drawer with both hands.
4
44
4
Select either <ENV.1> or <ENV.2> for the envelope cassette.
Select either <ENV.1> or <ENV.2> for the envelope cassette.Select either <ENV.1> or <ENV.2> for the envelope cassette.
Select either <ENV.1> or <ENV.2> for the envelope cassette.
l
When selecting <ENV.1>
When selecting <ENV.1>When selecting <ENV.1>
When selecting <ENV.1>
Set the size switch to <ENV.1>.
- This allows the envelope stored to <ENV.1> in the Set Envelope Cassette setting in the Additional
Functions screen to be loaded.
When selecting <ENV.2>
When selecting <ENV.2>When selecting <ENV.2>
When selecting <ENV.2>
Set the size switch to <ENV.2>.
- This allows the envelope stored to <ENV.2> in the Set Envelope Cassette setting in the Additional
Functions screen to be loaded.
NOTE
•
••
•
The default settings are as follows:
- ENV.1: COM 10
- ENV.2: COM 10
•
••
•
To change the stored envelope setting, see ‘Registering the Envelope Feeder Attachment,’ on
p. 3-23.