Setup guide
Saddle Finisher-G1/Puncher Unit-J1/Puncher Unit-G1
7-50
7-507-50
7-50
7
77
7
Handling Options
n Saddle Stitching Mode
Saddle Stitching ModeSaddle Stitching Mode
Saddle Stitching Mode
This function enables you to make booklets, consisting of pages folded and stapled at the
centre.
IMPORTANT
•
••
•
The maximum number of sheets that can be saddle stitched is 10 (40 pages).
•
••
•
The paper sizes that can be saddle stitched are A3 and A4R.
•
••
•
To perform Saddle Stitching A3, pull out the auxiliary tray of the booklet tray.
•
••
•
When the Saddle Stitching mode is set, folds may appear differently according to the type of paper
and/or the number of sheets to be saddle stitched.
n Punch Mode
Punch ModePunch Mode
Punch Mode
This function punches holes (2 or 4 holes) in the printed sheets.
IMPORTANT
•
••
•
You cannot punch holes in A4R (when puncher Unit-G1/H1 are attached), A5, A5R-size paper.
•
••
•
Holes cannot be punched in transparencies, tracing paper, labels, heavyweight paper, bond paper,
or letterheads.
•
••
•
This function is only available when the Finisher is equipped with the Puncher Unit-J1
and Puncher
Unit-G1.
•
••
•
The number of holes vary depending on the puncher unit attached.
- Puncher Unit-J1: 2 holes
- Puncher Unit-G1: 4 holes
6
5
4
3
4
3
2
1
3
8
7
6
5
8
7
2
1
6
8
1
The prints are folded in the
centre to form a booklet.
COPY
COPYCOPY
COPY
ORIGINALS
ORIGINALSORIGINALS
ORIGINALS