Setup guide

Saddle Finisher-G1/Puncher Unit-J1/Puncher Unit-G1
7-51
7-517-51
7-51
7
77
7
Handling Options
NOTE
•
••
•
The hole punched area is shown below.
•
••
•
The distance between the punch holes is shown in the illustration below.
Feeder
FeederFeeder
Feeder
Hole punched
area
Hole punched
area
Hole punched
area
Hole punched
area
Platen glass
Platen glassPlaten glass
Platen glass
When the Puncher Unit-G1 is
When the Puncher Unit-G1 is When the Puncher Unit-G1 is
When the Puncher Unit-G1 is
attached.
attached.attached.
attached.
When the Puncher Unit-J1 is
When the Puncher Unit-J1 is When the Puncher Unit-J1 is
When the Puncher Unit-J1 is
attached.
attached.attached.
attached.
80mm 80mm 80mm 80mm