Setup guide

Saddle Finisher-G1/Puncher Unit-J1/Puncher Unit-G1
7-53
7-537-53
7-53
7
77
7
Handling Options
IMPORTANT
•
••
•
When making prints with the Staple mode, do not remove the output sheets not yet stapled.
(Stapling will be performed after removing the jammed paper.)
2
22
2
Move the finisher away from the main unit.
Move the finisher away from the main unit.Move the finisher away from the main unit.
Move the finisher away from the main unit.
3
33
3
Open the top cover of the finisher, and remove any jammed paper.
Open the top cover of the finisher, and remove any jammed paper. Open the top cover of the finisher, and remove any jammed paper.
Open the top cover of the finisher, and remove any jammed paper.