Setup guide

Saddle Finisher-G1/Puncher Unit-J1/Puncher Unit-G1
7-63
7-637-63
7-63
7
77
7
Handling Options
12
1212
12
Close the front cover of the finisher.
Close the front cover of the finisher.Close the front cover of the finisher.
Close the front cover of the finisher.
CAUTION
CAUTIONCAUTION
CAUTION
•
••
•
When closing the cover, be careful not to get your fingers caught, as this may result in
When closing the cover, be careful not to get your fingers caught, as this may result in When closing the cover, be careful not to get your fingers caught, as this may result in
When closing the cover, be careful not to get your fingers caught, as this may result in
personal injury.
personal injury.personal injury.
personal injury.
NOTE
•
••
•
When you close the cover, the stapler unit automatically performs a “dry” stapling operation several
times to reposition the staples.
Replacing the Staple Case in the Stapler Unit
Replacing the Staple Case in the Stapler UnitReplacing the Staple Case in the Stapler Unit
Replacing the Staple Case in the Stapler Unit
When the finisher is almost out of staples and the staple case must be replaced, a display
similar to the one shown below appears on the touch panel display. Follow the procedure
described below to replace the staple case.