Setup guide

Card Reader-C1
7-81
7-817-81
7-81
7
77
7
Handling Options
The touch panel display returns to the screen for inserting the control card.
Department ID Management When Using the
Department ID Management When Using the Department ID Management When Using the
Department ID Management When Using the
Control Card
Control CardControl Card
Control Card
This section describes how to change the password and Impression Limit, and how to check the
print totals, when the control card is being used.
•
••
•
The maximum number of digits you can store for the department ID and password is seven. If you
store them with less than seven, the machine stores them as follows:
- Example: when <321> is entered
→
<0000321> is stored.
•
••
•
The maximum number of digits you can store for the Impression Limit is six.
•
••
•
The default setting is “Off.”
Changing the Password and Impression Limit
Changing the Password and Impression LimitChanging the Password and Impression Limit
Changing the Password and Impression Limit
1
11
1
Call up the desired screen as follows:
Call up the desired screen as follows:Call up the desired screen as follows:
Call up the desired screen as follows:
When the System Manager ID/Password is set, enter the System Manager ID and System Password
after pressing “System Settings.” Then, press (ID).