Setup guide
Card Reader-C1
7-88
7-887-88
7-88
7
77
7
Handling Options
5
55
5
Press “Done.”
Press “Done.”Press “Done.”
Press “Done.”
6
66
6
Press “Done.”
Press “Done.”Press “Done.”
Press “Done.”
Repeat this procedure.
The display returns to the Basic Features screen.
Specifying Whether or Not to Accept Print Jobs of Unknown ID
Specifying Whether or Not to Accept Print Jobs of Unknown IDSpecifying Whether or Not to Accept Print Jobs of Unknown ID
Specifying Whether or Not to Accept Print Jobs of Unknown ID
You can specify whether or not to print documents from a computer not correspondent with a
stored department ID.
NOTE
•
••
•
“Accept jobs with unknown ID” is displayed only when the Printer Kit is attached.
•
••
•
The default setting is “On.”
1
11
1
Call up the desired screen as follows:
Call up the desired screen as follows:Call up the desired screen as follows:
Call up the desired screen as follows:
When the System Manager ID/ Password is set, enter the System Manager ID and System Password
after pressing “System Settings.” Then, press .