Setup guide

What the iR3300/iR2800/iR2200 Series Can Do
1-14
1-141-14
1-14
1
11
1
Before You Start Using This Machine
• A message board with “Done.”
- If you press “Done” and close the message board, you can perform a normal operation. The
message appears again when the main power is turned back on, or after Auto Clear has
taken place. You can set the Auto Clear Time from 1 to 9 minutes, in one-minute increments.
You can also cancel this function. ( See ‘Setting the Time Taken for the Display to Return to
the Basic Features Screen After Finishing Operations,’ on p. 3-37.)
• A message board, in which the message appears in the Job/Print monitor area.
NOTE
•
••
•
For details of how to erase the message board, see ‘Erasing the Message Board (Clear Message
Board),’ on p. 4-25.
Using Other Useful Functions
Using Other Useful FunctionsUsing Other Useful Functions
Using Other Useful Functions
Other useful functions are as follows:
Other useful functions are as follows:Other useful functions are as follows:
Other useful functions are as follows:
n Auto Drawer Switching Function
Auto Drawer Switching FunctionAuto Drawer Switching Function
Auto Drawer Switching Function
If a paper drawer runs out of paper during printing, the machine automatically locates another
paper drawer loaded with the same size paper, and begins feeding paper from that paper
drawer.
NOTE
•
••
•
You can set whether or not a paper drawer is subject to Auto Drawer Switching for each function.
The default setting is “Off” for the stack bypass and “On” for the other paper drawers. (See ‘Setting a
Paper Drawer for Auto Paper Selection/Auto Drawer Switching,’ on p. 3-13.)