Setup guide

Entering Characters from the Touch Panel Display
1-36
1-361-36
1-36
1
11
1
Before You Start Using This Machine
Entering in Inches
Entering in InchesEntering in Inches
Entering in Inches
When you want to enter values in inches in all modes which require numeric entry, set the inch
entry function to “On” from the Common Settings of the Additional Functions screen. (See
‘Setting Inch Input,’ on p. 3-12.) You can then enter inches once you press “Inch” in a screen
requiring numeric entry.
The following example (1-1/2") shows inch entry in the Zoom Programme mode.
1
11
1
To enter 1-1/2 inches, press “1,” “_,” “1,” “/,” and “2” in the screen, in this
To enter 1-1/2 inches, press “1,” “_,” “1,” “/,” and “2” in the screen, in this To enter 1-1/2 inches, press “1,” “_,” “1,” “/,” and “2” in the screen, in this
To enter 1-1/2 inches, press “1,” “_,” “1,” “/,” and “2” in the screen, in this
order.
order.order.
order.
The entered values are displayed as shown above.