Setup guide

Placing Originals
1-41
1-411-41
1-41
1
11
1
Before You Start Using This Machine
Orientation of Originals
Orientation of OriginalsOrientation of Originals
Orientation of Originals
You can place original either vertically or horizontally. Always align the top edge of your original
with the back edge of the platen glass (top left corner) or the feeder.
NOTE
•
••
•
If the top edge of the original is not aligned with the back edge of the platen glass, prints may not be
made correctly, depending on the mode you have set.
•
••
•
A4 and A5-size originals can be placed either vertically or horizontally. However, the scanning speed
for horizontally placed originals is somewhat slower than for vertically placed originals. You can
place originals horizontally when printing with Preset Zoom mode, such as when processing
A4
→
A3.
•
••
•
Horizontally placed A4 and A5-size originals are referred to as A4R and A5R.
•
••
•
A3-size originals must be placed horizontally.
ABC
ABC
[Platen glass]
[Platen glass][Platen glass]
[Platen glass]
[Feeder]
[Feeder][Feeder]
[Feeder]
Horizontal placement
Horizontal placementHorizontal placement
Horizontal placementVertical placement
Vertical placementVertical placement
Vertical placement
Horizontal placement
Horizontal placementHorizontal placement
Horizontal placementVertical placement
Vertical placementVertical placement
Vertical placement
Place the original
face down
Place the original face
down
Place the original
face up
Place the original
face up