Operation Manual

3
Setting Specifications That Are Common to Each Function (Common Settings)
3-10
Selecting and Storing Settings to Suit your Needs
Selecting the Default Display After Auto Clear
You can select which screen to display after Auto Clear has taken place.
NOTE
• The duration for Auto Clear can be set. (See ‘Setting the Time Taken for the Display to Return to
the Basic Features Screen After Finishing Operations,’ on p. 3-34.)
• The default setting is “Initial Function.”
1 Call up the desired screen as follows:
2 Select the “Initial Function” or “Selected Function,” and press “OK.”
To display the screen set under Initial Function after Auto Clear is performed, press “Initial
Function.” For example, if Copy is set under Initial Function and Auto Clear is performed
after setting the Mail Box function, the display returns to the Copy Basic Features screen.
To display the screen before Auto Clear was performed, press “Select Function.” For
example, if Copy is set under Initial Function and Auto Clear is performed after setting the
Mail Box function, the display returns to the Mail Box Selection screen.
3 Press “Done.”
Repeat this procedure.
The specified mode is set and the display returns to the Basic Features screen.
(Additional Functions)
Auto Clear Setting
E1L_US_U_.book-INDEX Page 10 Wednesday, May 23, 2001 11:40 PM