Operation Manual

3
Setting Specifications That Are Common to Each Function (Common Settings)
3-15
Selecting and Storing Settings to Suit your Needs
NOTE
• When you select “Copy,” you can specify whether or not to set priority to paper type.
- When you set “Consider Paper Type” to “On,” paper will not be fed even when paper runs out
during printing, unless other loaded paper matches the size and type. For details of stored
paper types, see ‘Identifying the Type of Paper in a Paper Drawer,’ on p. 3-15.
- When you set “Consider Paper Type” to “Off,” paper will be fed from another paper drawer
when paper runs out during printing, if the same paper size is loaded in that paper drawer.
• When you select “Printer,” the Stack bypass icon is not displayed.
4 Press “Done.”
Repeat this procedure.
The specified mode is set and the display returns to the Basic Features screen.
Identifying the Type of Paper in a Paper Drawer
You can specify the paper type loaded in each paper drawer.
1 Call up the desired screen as follows:
2 Select the paper drawer for which you want to store the paper type.
The number of each paper drawer indicates the following locations:
(Additional Functions)
Store Paper Type
E1L_US_U_.book-INDEX Page 15 Wednesday, May 23, 2001 11:40 PM