Operation Manual

4
Setting the Department ID Management
4-19
System Manager Settings
Erasing Print Totals
The following instructions describe how to delete the print totals made so far, for all
departments. It is also possible to delete print totals for a particular department.
1 Call up the desired screen as follows:
When the System Manager ID/Password is set, enter the System Manager ID and System
Password after pressing “System Settings.” Then, press (ID).
2 Select “On,” and press “Print Totals.”
3 Press “Clear All Totals.”
To delete one print total at a time, press “▼” or “▲” to display the desired department, and
press “Clear.”
(Additional Functions)
E1L_US_U_.book-INDEX Page 19 Wednesday, May 23, 2001 11:40 PM