Operation Manual

7
Saddle Finisher-G1/Puncher Unit-K1
7-50
Handling Options
■ Saddle Stitching Mode
This function enables you to make booklets, consisting of pages folded and stapled at the
center.
IMPORTANT
• The maximum number of sheets that can be saddle stiched is 10 (40 pages).
• The paper sizes that can be saddle stitched are 11" x 17", and LTRR.
• To perform Saddle Stitching 11" x 17", pull out the auxiliary tray of the booklet tray.
• When the Saddle Stitching mode is set, folds may appear differently according to the type of paper
and/or the number of sheets to be saddle stitched.
■ Punch Mode
This function punches holes (2 or 3 holes) in the printed sheets.
IMPORTANT
• You cannot punch holes in STMT, or STMTR-size paper.
• Holes cannot be punched in transparencies, tracing paper, labels, heavyweight paper, bond paper,
or letterheads.
• This function is only available when the finisher is equipped with the Puncher Unit-K1.
• The machine automatically selects the type of hole punch (2 or 3 holes) depending on the selected
paper size.
-2 holes: LGL, LTRR
-3 holes: 11" x 17", LTR
6
5
4
3
4
3
2
1
3
8
7
6
5
8
7
2
1
6
8
1
The pages are folded in the
center to form a booklet.
COPY
ORIGINALS
E1L_US_U_.book-INDEX Page 50 Wednesday, May 23, 2001 11:40 PM