Operation Manual

1
What the imageRUNNER 3300/2800/2200 Series Can Do
1-10
Before You Start Using This Machine
NOTE
• Settings made in the Additional Functions screen are not changed even when you press
(Reset).
• For details of how to make custom settings, see ’Selecting and Storing Settings to Suit Your Needs,’
in Chapter 3.
• For details of the System Settings, see ‘System Manager Settings,’ in Chapter 4.
• When the FAX Board is not attached, “Report Settings,” “Custom Fax Settings,” and
“Communications Settings” are not displayed.
• When the Printer Kit is not attached, “Report Settings,” “Printer Settings,” “Network Settings,”
“Remote UI On/Off,” and “Clear Message Board” are not displayed.
• When the Network Interface Adapter is not attached, “Report Settings,” “Network Settings,” “Remote
UI On/Off,” and “Clear Message Board” are not displayed.
• For details of the Custom Fax Settings, Printer Settings, Report Settings, Communications Setting,
Network Settings and Remote UI On/Off functions, refer to the instruction manual attached to FAX
Board, Printer Kit, or Network Interface Adapter.
• ”Auto Offline” is displayed only when the network scan Kit is attached.
Functions That Conserve Power Consumption
You can conserve power consumption efficiently using the following functions when the
machine is not operated.
NOTE
• The touch panel display turns off when the machine enters one of these functions.
• You can print data sent from a computer even when the machine enters one of these functions.
■ Sleep Mode
You can set the machine to enter the Sleep mode whenever you desire, by pressing the
control panel power switch. To reactivate the machine, press the control panel power
switch again.
The Additional Functions screen The System Settings screen
E1L_US_U_.book-INDEX Page 10 Wednesday, May 23, 2001 11:40 PM