Operation Manual

1
What the imageRUNNER 3300/2800/2200 Series Can Do
1-14
Before You Start Using This Machine
•A message board with “Done.”
- If you press “Done” and close the message board, you can perform a normal operation.
The message appears again when the main power is turned back on, or after Auto Clear
has taken place. You can set the Auto Clear Time from 1 to 9 minutes, in one-minute
increments. You can also cancel this function. (See ‘Setting the Time Taken for the Display
to Return to the Basic Features Screen After Finishing Operations,’ on p. 3-34.)
•A message board, in which the message appears in the Job/Print monitor area.
NOTE
• For details of how to erase the message board, see ‘Erasing the Message Board (Clear Message
Board),’ on p. 4-25.
Using Other Useful Functions
Other useful functions are as follows:
■ Auto Drawer Switching Function
If a paper drawer runs out of paper during printing, the machine automatically locates
another paper drawer loaded with the same size paper, and begins feeding paper from
that paper drawer.
NOTE
• You can set whether or not a paper drawer is subject to Auto Drawer Switching for each function. The
default setting is “Off” for the stack bypass and “On” for the other paper drawers. (See ‘Setting a
Paper Drawer for Auto Paper Selection/Auto Drawer Switching,’ on p. 3-13.)
E1L_US_U_.book-INDEX Page 14 Wednesday, May 23, 2001 11:40 PM