Operation Manual

1
What the imageRUNNER 3300/2800/2200 Series Can Do
1-15
Before You Start Using This Machine
■ Auto Clear Function
If the machine is not operated for a period of about two minutes after prints have been
made or a key operation performed, it automatically returns the settings to the Standard
mode.
NOTE
• You can set the Auto Clear Time from 0 to 9 minutes, in one-minute increments. The default setting is
“2 minutes.” (See ‘Setting the Time Taken for the Display to Return to the Basic Features Screen
After Finishing Operations,’ on p. 3-34.)
■ Copy Waiting Time Display Function
When you turn on the Job Duration Display from the Additional Functions screen, the
display shows the copy waiting time depending on the selected copy mode.
NOTE
• The job duration time is not displayed for the Transparency Interleaving, Cover/Sheet Insertion,
Different Size Originals, Rotate Collating, and Rotate Grouping modes, or when the copy waiting
time is less than one minute. (See the Copying Guide.)
■ Paper Supply Indicator Function
This function shows the remaining amount of paper in each paper drawer when you select
the paper source (see the Copying Guide and the Mail Box Function Guide) or when
paper in one paper drawer has run out during printing.
There are four different indicators as shown below.
Display Remaining paper
Paper drawer is approximately 50% - 100% full.
Paper drawer is approximately 10% - 50% full.
Paper drawer is less than approximately 10% full.
Paper drawer is empty.
Display when selecting paper
Paper Supply indicator
Display when paper has run out
E1L_US_U_.book-INDEX Page 15 Wednesday, May 23, 2001 11:40 PM