Operation Manual

Entering the Department ID and Password

1-36

Before You Start Using This Machine

Entering the Department ID and Password

When Department ID Management has been set, the Department ID and Password must be

entered before operating this machine.

NOTE

•

When you are using the control card, the message <You must insert a control card.> appears in the

touch panel display. Insert the control card into the card slot. (See ‘Card Reader-C1,’ on p. 7-82.)

Operations After Turning the Power On

After turning the power on and the machine becomes ready to scan, the screen for entering

the Department ID and Password appears.

NOTE

•

For details of how to turn the power on, see ‘Main Power and Control Panel Power,’ on p. 1-23.

Press “Department ID” and enter the department ID, then press

“Password” and enter the password, using the - (numeric

keys).

If the Password is not set, proceed to step 2.

NOTE

•

If you made a mistake when entering the Department ID or Password, press (Clear), and

enter the correct value.

E1L_US_U_.book-INDEX Page 36 Wednesday, May 23, 2001 11:40 PM