Operation Manual

1
Making Prints Using the Stack Bypass
1-52
Before You Start Using This Machine
If the following screen is displayed, adjust the width of the slide guide and set the size.
IMPORTANT
• Set the paper size to the same size as the paper loaded in the stack bypass.
• Designate which envelope type you want to set. If the envelope type is not designated
correctly, a paper jam will occur.
5 Select the type of paper (Plain, Heavy, etc.), and press “OK.”
IMPORTANT
• Select the correct paper type to avoid a paper jam.
NOTE
• For details of paper types, see ‘Available Paper Stock,’ on p. 1-57.
E1L_US_U_.book-INDEX Page 52 Wednesday, May 23, 2001 11:40 PM