Operation Manual

Making Prints Using the Stack Bypass

1-54

Before You Start Using This Machine

Using the Stack Bypass While Reserving Print Jobs

When paper is being fed from the stack bypass for the current print job, or a job is reserved,

you can designate the paper to be loaded in the stack bypass for the next reserved job.

Press “Stack Bypass Setting” in the Paper Selection screen that

appears when specifying reserved print settings.

NOTE

•

When Standard Stack Bypass Settings is set to “On,” and “Stack Bypass” is selected, the

paper stored in the Standard Settings is displayed. (See ‘Setting the Standard Paper for the

Stack Bypass,’ on p. 3-24.)

Select the paper size, and press “Next.”

NOTE

• To select free size paper, press “Free Size.”

•

To select envelopes, press “Envelope.”

•

To select A or B series paper size, press “A/B-size.”

•

When storing paper as Standard Stack Bypass Settings, the paper size/type are displayed.

(See ‘Setting the Standard Paper for the Stack Bypass,’ on p. 3-24.)

E1L_US_U_.book-INDEX Page 54 Wednesday, May 23, 2001 11:40 PM