Setup guide

Making Copies with Sheets of Paper Interleaved Between Transparencies (Transparency Interleaving)
2-14
2-142-14
2-14
Making Copies with Sheets of Paper Interleaved
Making Copies with Sheets of Paper Interleaved Making Copies with Sheets of Paper Interleaved
Making Copies with Sheets of Paper Interleaved
Between Transparencies
Between Transparencies Between Transparencies
Between Transparencies
(Transparency Interleaving)
(Transparency Interleaving)(Transparency Interleaving)
(Transparency Interleaving)
Use this mode when copying onto transparencies fed from the stack bypass. The machine
automatically interleaves a sheet of paper between each transparency. The interleaf sheets protect
the copied surface of the transparencies. The image can also be printed on the interleaf sheets.
IMPORTANT
•
••
•
When the machine is operating in the Transparency Interleaving mode, you cannot use the Finisher, Two-sided, Two-
page Separation, Cover/Sheet Insertion, Booklet, Image Combination, Image Separation, Image Repeat, or Mirror
Image modes.
•
••
•
You cannot make more than one set of copies at a time in the Transparency Interleaving mode.
•
••
•
Even if your machine is equipped with the Finisher, you cannot use any of the Finisher modes with the Transparency
Interleaving mode.
NOTE
•
••
•
The machine’s counter does not count blank interleaf sheets as copies.
•
••
•
Transparencies are output into Tray A when Inner 2way Tray-A1 is attached, and into Tray B in the case of Saddle
Finisher-G1, even if the other tray is specified as a designated tray.
n
When Not Printing on the Interleaf Sheets:
When Not Printing on the Interleaf Sheets:When Not Printing on the Interleaf Sheets:
When Not Printing on the Interleaf Sheets:
Outputs a printed transparency and a blank interleaf sheet alternately.
REPORT REPORT
Originals
OriginalsOriginals
Originals
Copies
CopiesCopies
Copies
Transparencies
TransparenciesTransparencies
Transparencies
Blank interleaf
Blank interleafBlank interleaf
Blank interleaf
sheets
sheetssheets
sheets