Setup guide

Copy Settings List
3-2
3-23-2
3-2
Copy Settings List
Copy Settings ListCopy Settings List
Copy Settings List
The following items can be stored or set in the Copy Settings screen.
Settings marked * are default settings.
*
1
: Displayed only when the Feeder (DADF-H1) is attached.
*
2
: Not displayed when the Finisher-J1 is attached.
NOTE
•
••
•
For instructions on how to set the modes not described in this manual, refer to the other manuals available separately.
•
••
•
The Copy Settings screen is made up of several screens. Use [
t
] or [
s
]
to scroll to the screen you want, and make
the required settings.
•
••
•
When [
t
] or [
s
] should be pressed, the indication is displayed in this manual.
Additional Function
Additional FunctionAdditional Function
Additional Function Available settings
Available settingsAvailable settings
Available settings Applicable page
Applicable pageApplicable page
Applicable page
Copy Settings
Copy SettingsCopy Settings
Copy Settings
Standard Key 1, 2 Settings All modes (No setting*) p. 3-3
Auto Collate*
1
On*/Off p. 3-5
Image Orientation Priority*
2
On/Off* p. 3-6
Job Duration Display On/Off* p. 3-7
Auto Orientation On*/Off p. 3-8
Photo Mode On/Off* p. 3-9
Standard Settings Store, Initialise p. 3-10
Initialise Copy Settings Initialise p. 3-13