User`s guide

List of Error Messages
3-8
Troubleshooting
3
# 037
Cause Documents could not be received because there was insufficient memory available.
Remedy Erase unnecessary documents and documents with errors from memory to increase the
amount of available memory. (See Chapter 2, "Introduction to the Mail Box Functions," in the
Copying and Mail Box Guide, and Chapter 6, "Receiving Documents," in the Sending and
Facsimile Guide.)
#099
Cause Copying/printing was interrupted.
Remedy Try copying/printing again.
# 701
Cause 1 The specified Department ID does not exist, or the password has changed.
Remedy Enter the correct Department ID or password using - (numeric keys) on the control
panel, and try again.
Cause 2 The Department ID or password was changed while the machine was processing a job.
Remedy Change the Department ID and password, and try again. If you do not know the password,
contact your System Manager.
Cause 3 <Allow Printer Jobs with Unknown IDs> is set to 'Off'.
Remedy Set <Allow Printer Jobs with Unknown IDs> is set to 'On'.
# 703
Cause The hard disk is full, and no more images can be scanned.
Remedy 1 Wait a few moments, and try scanning again after other send jobs are complete.
Remedy 2 Erase documents stored in inboxes. If the machine still does not operate normally, turn the
main power OFF, and then back ON again. (See "Main Power and Control Panel Power," in
the Reference Guide.)
Downloaded from ManualsPrinter.com Manuals