User`s guide

List of Error Messages
3-9
Troubleshooting
3
# 711
Cause The inbox memory is full.
Remedy Erase the unnecessary documents stored in the inbox. (See Chapter 2, "Introduction to the
Mail Box Functions," in the Copying and Mail Box Guide, and Chapter 6, "Receiving
Documents," in the Sending and Facsimile Guide.
# 712
Cause The maximum number of documents are already stored in the inbox.
Remedy Erase the unnecessary documents stored in the inbox. (See Chapter 2, "Introduction to the
Mail Box Functions," in the Copying and Mail Box Guide, and Chapter 6, "Receiving
Documents," in the Sending and Facsimile Guide.
# 749
Cause You could not execute the job because a service call message is being displayed.
Remedy Turn the main power OFF, wait for 10 or more seconds, and turn the main power back ON.
If the machine still does not work normally, turn the main power OFF, disconnect the
machine, and contact your local authorized Canon dealer. (See "Main Power and Control
Panel Power," in the Reference Guide.)
# 759
Cause An error occurred while sending the URL of a User Inbox.
Remedy Contact your System Manager.
# 816
Cause You cannot print because the set page limit total has been reached.
Remedy Contact your System Manager.
# 817
Cause A communication error occurred between your machine and remote copy printers.
Remedy Try delivering device information again after the client machine finishes processing the job.
Downloaded from ManualsPrinter.com Manuals