Service Manual Heater Cassette Heater Unit 27 Mar 22 2004
Application This manual has been issued by Canon Inc. for qualified persons to learn technical theory, installation, maintenance, and repair of products. This manual covers all localities where the products are sold. For this reason, there may be information in this manual that does not apply to your locality. Corrections This manual may contain technical inaccuracies or typographical errors due to improvements or changes in products.
Introduction Symbols Used This documentation uses the following symbols to indicate special information: Symbol Description Indicates an item of a non-specific nature, possibly classified as Note, Caution, or Warning. Indicates an item requiring care to avoid electric shocks. Indicates an item requiring care to avoid combustion (fire). Indicates an item prohibiting disassembly to avoid electric shocks or problems. Indicates an item requiring disconnection of the power plug from the electric outlet.
Introduction The following rules apply throughout this Service Manual: 1. Each chapter contains sections explaining the purpose of specific functions and the relationship between electrical and mechanical systems with reference to the timing of operation. In the diagrams, the arrow represents the path of mechanical drive; where a signal name accompanies the symbol , indicates the direction of the electric signal.
Contents Contents Chapter 1 Specifications 1.1 Names of Parts................................................................................................................................................... 1- 1 1.1.1Names of Parts............................................................................................................................................. 1- 1 Chapter 2 Functions 2.1 Basic Operation ......................................................................................
Chapter 1 Specifications
Contents Contents 1.1 Names of Parts.................................................................................................................................................... 1-1 1.1.1 Names of Parts.............................................................................................................................................
Chapter 1 1.1 Names of Parts 1.1.
Chapter 2 Functions
Contents Contents 2.1 Basic Operation .................................................................................................................................................. 2-1 2.1.1 Basic Sequence of Operation ...................................................................................................................... 2-1 2.2 Power Supply ....................................................................................................................................................
Chapter 2 2.1 Basic Operation 2.1.
Chapter 2 2.2 Power Supply 2.2.
Chapter 3 Installation
Contents Contents 3.1 Unpacking and Chacking the Components ........................................................................................................ 3-1 3.1.1 Checking the Contents................................................................................................................................. 3-1 3.2 Preparation Before Installation........................................................................................................................... 3-2 3.2.
Chapter 3 3.1 Unpacking and Chacking the Components 3.1.1 Checking the Contents 0003-9671 1 Cassette heater 1 pc. 230V: FM2-0564-000 2 RS tightening screw (M4x10) 2 pc.
Chapter 3 3.2 Preparation Before Installation 3.2.1 Before Starting the Work Before starting the work, be sure to go through the following on the host machine: 1. turn off the control panel power switch. 2. turn off the main power switch. 3. disconnect the power cable (for the wall outlet).
Chapter 3 3.3 Installation Procedure 3.3.1 Installation Procedure 2) Slide out the right deck; then, remove the 4 screws [1], and detach the right deck compartment. 0003-9673 1) Slide out the left deck; then, remove the 4 screws [1], and take out the left deck compartment. [1] [1] [1] F-3-3 3) Detach the cassette 3 from the machine. 4) Remove the screw [2], and detach the harness cover [1] [1].
Chapter 3 5) Fit the cassette heater [1] into the slot [2]; then, fit 6) Secure the cassette heater in place using 2 screws section A of the cassette heater into the other slot [4]. [1]. [2] [1] F-3-7 [1] F-3-5 7) Connect the cassettes heater harness [1]. [1] [3] F-3-8 8) Cut off the 4 segments of the harness cover you removed in step 4) using nippers.
Chapter 3 9) Mount the harness cover [1] to the machine using a screw [2]. [1] [2] F-3-10 10) Fit the cassette 3, right deck compartment, and left deck compartment back in the machine. 11) Turn on the machine’s environment switch and heater switch.
Chapter 3 3-6
Mar 22 2004