User Guide

(1/2)

Service Bulletin

Issued by Canon Europa N.V.

Copier Color

Hardware

Revised:

Addition of Affected Machines.

Location:

Intermediate Transfer Belt Assembly

Subject:

New setting of Auxiliary Roller Unit

Detail:

A slight gap between the Auxiliary Roller (1) and the Bearing in the Release Arm (rear) causes the Auxiliary

Roller (1) to be scraped or worn down and that may lead to an abnormal sound (creaking noise). In order to

prevent this, the measure that the Bearing is force-fitted to the Release Arm is taken. In accordance with the

change, the Auxiliary Roller Unit, which combines the Auxiliary Roller (1) (2), the Release Arm (front) (rear)

and the Bearings, are newly set.

Service Work:

If the symptom above occurs, or when replacing the Auxiliary Roller (1) (2) or the Release Arm (front) (rear),

make sure to replace with newly set Auxiliary Roller Unit.

Model:

iR 5800C

iR 5800CN

iR 6800C

iR 6800CN

Ref No.:

iR6800C-026 Rev. 1

(F2-T01-0M3-10062-02)

Date:

October, 2005

[1] ROLLER, AUXILIARY, 1

[2] ROLLER, AUXILIARY, 2

[3] ARM, RELEASE, FRONT

[4] ARM, RELEASE, REAR

P-1 ROLLER UNIT, AUXILIARY

PAGE 1
Service Bulletin Copier Color Issued by Canon Europa N.V. Hardware Model: Ref No.: iR 5800C iR 5800CN iR 6800C iR 6800CN iR6800C-026 Rev. 1 (F2-T01-0M3-10062-02) Date: October, 2005 Revised: Addition of Affected Machines.
PAGE 2
iR6800C-026 Rev. 1 Service Parts: No. Part number Description Q'ty I.C. Old FC5-1666-000 ROLLER, AUXILIARY, 1 1->0 N New FM2-6857-000 ROLLER UNIT, AUXILIARY 0->1 Y Old FC5-1760-000 ROLLER, AUXILIARY, 2 1->0 N New FM2-6857-000 ROLLER UNIT, AUXILIARY 0->1 Y Old FL2-0406-000 ARM, RELEASE, FRONT 1->0 N New FM2-6857-000 ROLLER UNIT, AUXILIARY 0->1 Y Old FL2-0407-000 ARM, RELEASE, REAR 1->0 N New FM2-6857-000 ROLLER UNIT, AUXILIARY 0->1 Y 1 P.C.