User Guide

(1/3)

Service Bulletin

Issued by Canon Europa N.V.

Copier Color

Hardware

Revised:

Permanent countermeasure added to factory measures.

Location:

Reader Frame Assembly

Subject:

Countermeasure against the error occurrence “E202-0001/0002”, due to the breakage of IC6

Detail:

The errors “E202-0001/0002”, occur due to the breakage of IC6 [1]

<Cause>

The installation or uninstallation of the Flexible Flat Cable [2], which controls the current flow into the Scanner

Drive Motor, may not have been done successfully. #34 May be broken, an overcurrent may flow into the

Interface PCB, the IC6 [1] may be broken and may lead to occur smoke.

Model:

iR 5800C

iR 5800CN

iR 6800C

iR 6800CN

Ref No.:

iR6800C-027 Rev. 1

(F2-T01-0M3-10064-02)

Date:

October, 2005

P-1 INTERFACE PCB ASSEMBLY

[1] IC6

[2] CABLE, FLEXIBLE FLAT

PAGE 1
Service Bulletin Copier Color Issued by Canon Europa N.V. Hardware Model: Ref No.: iR 5800C iR 5800CN iR 6800C iR 6800CN iR6800C-027 Rev. 1 (F2-T01-0M3-10064-02) Date: October, 2005 Revised: Permanent countermeasure added to factory measures.
PAGE 2
iR6800C-027 Rev. 1 1. Temporary countermeasure Add chip resistor to C49 (unused part) [3] on the Interface PCB.
PAGE 3
iR6800C-027 Rev. 1 2. Permanent countermeasure C49 Silk changed to R75. After changing the Silk, the revision number [6] of the Interface PCB Assembly will be advanced to "04". P-5 Interface PCB Assembly with new Silk [5] New Silk (R75) [6] Revision No. Service Work: When the symptom above occurs, replace the Flexible Flat Cable by a new one and also replace the Interface PCB by the new type. Service Part: Description Old INTERFACE PCB ASSEMBLY Part number Q'ty I.C. FM2-1102-000 1->0 N P.C.