Camera User Guide • Make sure you read this guide, including the “Safety Precautions” section, before using the camera. • Reading this guide will help you learn to use the camera properly. • Store this guide safely so that you can use it in the future.
Checking the Package Contents Check if the following items are included in your camera package. If anything is missing, contact the retailer where you purchased the camera. Camera Battery Pack NB-6L (with Terminal Cover) Battery Charger CB-2LY/CB-2LYE Interface Cable IFC-400PCU Stereo AV Cable AVC-DC400ST Wrist Strap WS-DC10 Getting Started DIGITAL CAMERA Solution Disk Warranty System Booklet Using the Manuals Also refer to the manuals on the DIGITAL CAMERA Manuals Disk.
Read This First Test Shots and Disclaimer Take some initial test shots and play them back to make sure the images were recorded correctly. Please note that Canon Inc., its subsidiaries and affiliates, and its distributors are not liable for any consequential damages arising from any malfunction of a camera or accessory, including memory cards, that results in the failure of an image to be recorded or to be recorded in a way that is machine readable.
What Do You Want to Do? 4 Shoot z Shoot, leaving it to the camera to make settings .........................25 Take good people shots I Portraits (p. 64) V Kids and pets (p. 65) Facial expressions (p. 81) Shoot various other scenes Night Scene (p. 65) Low Light (p. 65) w At the beach (p. 65) O P Against snow (p. 66) t Foliage (p. 65) Fireworks (p. 66) Shoot with special effects Fish-eye Effect (p. 69) Creative Light Effect (p. 71) Miniature Effect (p. 70) Monochrome (p.
What Do You Want to Do? View 1 z Look at my pictures ......................................................................28 z Automatically play back pictures (slideshow).............................124 z Look at my pictures on a TV ......................................................133 z Look at my pictures on a computer. .............................................34 z Quickly search pictures ..............................................................120 z Erase pictures ......................
Table of Contents Chapters 1 – 3 explain the basic operations and frequently used functions of this camera. Chapters 4 onward explain the advanced functions, letting you learn more as you read each chapter. Checking the Package Contents .......2 Read This First ..................................3 What Do You Want to Do? ................4 Table of Contents ..............................6 Conventions Used in This Guide .......9 Safety Precautions...........................10 1 Getting Started................
Table of Contents 5 Choosing Settings Yourself...............................83 7 Using Various Functions for Shooting Movies.............. 111 Shooting in Program AE ................. 84 Adjusting the Brightness (Exposure Compensation) ............ 85 Turning the Flash On ...................... 85 Adjusting the White Balance ........... 86 Changing the ISO Speed ................ 88 Correcting the Brightness and Shooting (i-Contrast)..................... 89 Changing the Aspect Ratio .............
Table of Contents Adding Effects with the My Colors Function.......................................148 Correcting the Brightness (i-Contrast)...................................149 Correcting the Red-Eye Effect .......150 9 Printing ............................. 151 Printing Images..............................152 Choosing Images for Printing (DPOF) ........................................159 10Customizing Camera Settings ............................ 163 Changing Camera Settings............
Conventions Used in This Guide • • • • • • • • • Icons are used in the text to represent the camera buttons and switches. Language that displays on the screen appears inside [ ] (square brackets). : Things you should be careful about : Troubleshooting tips : Hints for getting more out of your camera : Supplemental information (p. xx): Reference pages (“xx” stands for a page number) This guide assumes all functions are at their default settings.
Safety Precautions • Before using the product, please ensure that you read the safety precautions described below. Always ensure that the product is used correctly. • The safety precautions noted on the following pages are intended to prevent injuries to yourself and other persons, or damage to the equipment. • Be sure to also check the guides included with any separately sold accessories you use. Warning Denotes the possibility of serious injury or death.
Safety Precautions • Turn the camera off in places where camera use is prohibited. The electromagnetic waves emitted by the camera may interfere with the operation of electronic instruments and other devices. Exercise adequate caution when using the camera in places where use of electronic devices is restricted, such as inside airplanes and medical facilities. • Do not play the supplied CD-ROM(s) in any CD player that does not support data CD-ROMs.
Safety Precautions • Remove and store the battery when you are not using the camera. If the battery is left inside the camera, damage caused by leakage may occur. • Before you discard the battery, cover the terminals with tape or other insulators. Contacting other metal materials may lead to fire or explosions. • Unplug the battery charger from the power outlet after charging is complete, or when you are not using it. • Do not place anything, such as cloth on top of the battery charger while it is charging.
1 Getting Started This chapter explains preparations before shooting, how to shoot in A mode, and then how to view and erase the images you take. The latter part of this chapter explains how to shoot and view movies and transfer images to a computer. Attaching the Strap/Holding the Camera • Attach the included strap and wrap it around your wrist to avoid dropping the camera during use. • Keep your arms tight against your body while holding the camera firmly by the sides when shooting.
Using the Touch Panel This camera has a touch panel screen that allows you to perform operations with the touch of your finger. Touch Briefly touch the screen with your finger. z Used for choosing icons or magnifying images. Drag Touch and drag your finger across the screen. z Used for playback operations such as switching to the next image, or moving the displayed location of magnified images.
Charging the Battery Use the included charger to charge the battery. Be sure to charge the battery as it is not charged at the time of purchase. Remove the cover. Insert the battery. z Align the o marks on the battery and charger, then insert the battery by sliding it in ( ) and down ( ). Charge the battery. z For CB-2LY: Flip out the plug ( CB-2LY CB-2LYE ) and plug the charger into a power outlet ( ). z For CB-2LYE: Plug the power cord into the charger, then plug the other end into a power outlet.
Charging the Battery Number of Possible Shots Number of Shots Approx. 180 Playback Time Approx. 4 hours • The number of shots that can be taken is based on the Camera & Imaging Products Association (CIPA) measurement standard. • Under some shooting conditions, the number of shots that can be taken may be less than mentioned above. Battery Charge Indicator An icon or message will appear on the screen indicating the battery’s charge state. Display Summary Sufficient charge.
Compatible Memory Cards (Sold Separately) The cards below can be used without restrictions on their capacities. • SD memory cards* • SDHC memory cards* • SDXC memory cards * • MultiMediaCards • MMCplus memory cards • HC MMCplus memory cards • Eye-Fi Cards * This memory card complies with the SD standards. Some cards may not operate properly depending on the brand of card used.
Inserting the Battery and Memory Card Insert the battery. z Press the battery lock in the direction of the arrow, then insert the battery as shown until it locks into place with a click. z Be sure to insert the battery in the correct direction or it will not properly lock into place. Terminals Battery lock Insert the memory card. z Insert the memory card as shown until it locks into place with a click. z Be sure the memory card is oriented correctly.
Inserting the Battery and Memory Card Removing the Battery and Memory Card Remove the battery. z Open the cover and press the battery lock in the direction of the arrow. X The battery will pop up. Remove the memory card. z Push the memory card in until you hear a click, then slowly release it. X The memory card will pop up. Number of Shots per Memory Card Memory Card Number of Shots 4 GB Approx. 1231 16 GB Approx. 5042 • Values are based on the default settings.
Setting the Date and Time The Date/Time settings screen will appear the first time the camera is turned on. Since the dates and times recorded into your images are based on these settings, be sure to set them. Turn on the camera. z Press the ON/OFF button. X The Date/Time screen will appear. Set the date and time. z Touch the option you want to set. X op will appear. z Touch op to set a value. Complete the setting. z Touch Ú. X Once the date and time have been set, the Date/Time screen will close.
Setting the Date and Time Changing the Date and Time You can change the current date and time settings. Display the menu. z After touching ø, touch n. Choose [Date/Time]. z Touch the 3 tab. z Drag up or down the screen to choose [Date/Time]. z Touch [Date/Time]. Change the date and time. z Follow Steps 2 and 3 on p. 20 to adjust the setting. z Touch Ú twice to close the menu.
Setting the Display Language You can change the language that displays on the screen. Enter Playback mode. z Press the 1 button. Display the settings screen. z Touch and hold n. X The settings screen will appear. Set the display language. z Touch a display language, then touch Ú. X Once the display language has been set, the settings screen will close. What if n does not appear? When there are images on the memory card, touch ø on the lower left of the screen to display n.
Formatting Memory Cards Before you use a new memory card or one that has been formatted in other devices, you should format the card with this camera. Formatting (initializing) a memory card erases all data on the memory card. As you cannot retrieve the erased data, exercise adequate caution before formatting the memory card. Before formatting an Eye-Fi card (p. 179), be sure to install the software contained on the card to a computer. Display the menu. z Touch ø, then touch n. Choose [Format].
Pressing the Shutter Button Complete formatting. X When formatting ends, [Memory card formatting complete] will appear on the screen. z Touch [OK]. Formatting or erasing data on a memory card merely changes the file management information on the card and does not ensure its contents are completely erased. Be careful when transferring or disposing of a memory card. When disposing of a memory card, take precautions such as physically destroying the card to prevent personal information leaks.
Taking Pictures (Smart Auto) Does the length of the shutter sound change? • Since the time required to shoot differs depending on the scene you want to take, the length of the shutter sound may change. • If the camera or subject moves while the shutter sound is playing, the recorded image may be blurry. If you shoot without pressing the shutter button halfway, the image may not be in focus.
Taking Pictures (Smart Auto) Compose the shot. z Moving the zoom lever toward i Zoom bar (telephoto) will zoom in on your subject, making it appear larger. Moving the lever toward j (wide angle) will zoom out from your subject, making it appear smaller. (The zoom bar showing the zoom position appears on the screen.) Focus. z Press the shutter button halfway to focus. X When the camera focuses, it will beep twice and AF frames will appear where the camera focused.
Taking Pictures (Smart Auto) • What if white and gray frames appear when you point the camera toward a subject? A white frame appears on the face or subject that the camera detected as the main subject, while gray frames appear on other detected faces. The frames will follow the subjects within a certain range. If the subject moves, however, the gray frames will disappear, leaving only the white frame.
Viewing Images Choosing the subject to focus on (Touch AF) After touching the subject and displaying , the focus and exposure will be maintained where the blue AF frame appears when you press the shutter button halfway (Servo AF). Press the shutter button fully to shoot. Viewing Images You can view the images you have taken on the screen. Enter Playback mode. z Press the 1 button. X The last image you took will appear. Choose an image.
Active Display z Pressing the 1 button again while the lens is retracted will turn off the power. Switching to Shooting mode Pressing the shutter button halfway while in Playback mode switches the camera to Shooting mode. Active Display When an image is displayed, lightly tapping the camera as shown below will switch to the next image. • Be sure to put the strap around your wrist, and hold the camera firmly to avoid dropping it. • Depending on the way you tap the camera, images may not switch.
Erasing Images You can choose and erase images one at a time. Please note that erased images cannot be recovered. Exercise adequate caution before erasing an image. Enter Playback mode. z Press the 1 button. X The last image you took will appear. Choose an image to erase. z Drag across the screen to choose an image. Erase the image. z After touching ø, drag up or down the screen to choose a, then touch the menu item again. X [Erase?] appears on the screen. z Touch [Erase].
Shooting Movies The camera will determine the subject and shooting conditions, and select the best settings for the scene. The audio will record in stereo. If you continue shooting for a long time, the camera may become warm. This is not a malfunction. Choose A mode. z Set the mode switch to A. Remaining Time Compose the shot. z Moving the zoom lever toward i will zoom in on your subject, making it appear larger. Moving the lever toward j will zoom out from your subject, making it appear smaller. Shoot.
Shooting Movies Microphones z Do not touch the microphones while shooting. z Do not operate the camera other than touching while shooting. Operation sounds will be recorded in the movie. Stop shooting. z Touch . X The camera will beep twice and stop shooting the movie. X The movie will record to the memory card. X Shooting will automatically stop when the memory card fills. Zooming while shooting Pressing the zoom lever while shooting will zoom in on or out from the subject.
Viewing Movies You can view the movies you have shot on the screen. Enter Playback mode. z Press the 1 button. X appears on movies. Choose a movie. z Drag across the screen to choose a movie to play back. Play the movie. z Touch . X The movie will play. z If you touch the screen during playback, the movie will stop, and the movie control panel will appear on the screen. z Drag up or down the screen during playback to adjust the volume. X After the movie finishes, appears.
Transferring Images to a Computer for Viewing You can use the included software to transfer images you have shot with the camera to a computer for viewing. If you are already using software included with another Canon-brand compact digital camera, install the software from the included CD-ROM, overwriting your current installation.
Transferring Images to a Computer for Viewing Preparations Windows Vista and Mac OS X (v10.5) are used for these explanations. Install the Software. Windows Place the CD in the computer’s CDROM drive. z Place the supplied CD-ROM (DIGITAL CAMERA Solution Disk) (p. 2) into the computer’s CD-ROM drive. Begin installation. z Click [Easy Installation] and follow the on-screen instructions to proceed with the installation.
Transferring Images to a Computer for Viewing Connect the camera to the computer. z Turn off the camera. z Open the cover and insert the included interface cable’s smaller plug (p. 2) firmly into the camera terminal in the direction shown. z Insert the interface cable’s larger plug into the computer. For connection details, refer to the user guide provided with the computer. Turn on the camera. z Press the 1 button to turn on the camera. Open CameraWindow.
Transferring Images to a Computer for Viewing For Windows 7, use the following steps to display CameraWindow. Click on the task bar. In the screen that appears, click the link to modify the program. Choose [Downloads Images From Canon Camera using Canon CameraWindow] and click [OK]. Double click . Transfer and View Images z Click [Import Images from Camera], and then click [Import Untransferred Images]. X All images not previously transferred will transfer to the computer.
Accessories Supplied with Camera Wrist Strap WS-DC10 Battery Pack NB-6L with Terminal Cover* Stereo AV Cable AVC-DC400ST* Battery Charger CB-2LY/CB-2LYE* DIGITAL CAMERA Solution Disk Interface Cable IFC-400PCU* *Also available for purchase separately.
Separately Sold Accessories The following camera accessories are sold separately. Some accessories are not sold in some regions, or may no longer be available. Power Supplies Battery Charger CB-2LY/CB-2LYE z A charger for charging Battery Pack NB-6L. Battery Pack NB-6L z Rechargeable lithium-ion battery. AC Adapter Kit ACK-DC40 z This kit lets you power the camera using household power. Recommended for powering the camera for an extended period of time or when connecting to a computer or printer.
Separately Sold Accessories Other Accessories HDMI Cable HTC-100 z Use this cable to connect the camera to the HDMI™ terminal on a high-definition TV set. Printers SELPHY series Canon-Brand PictBridge Compliant Printers z By connecting your camera to a Canonbrand PictBridge compliant printer, you can print your images without having to use a computer. For more information, visit your nearest Canon retailer. Inkjet Printers Use of genuine Canon accessories is recommended.
2 Learning More This chapter explains the parts of the camera and what appears on the screen, as well as the basic operating instructions.
Components Guide Lens Microphones (p. 32) Zoom Lever Shooting: i (Telephoto) / j (Wide Angle) (pp. 26, 31, 55) Playback: k (Magnify) / g (Index) (pp. 120, 127) Shutter Button (p. 24) ON/OFF button (p. 20) Mode Switch Lamp (pp. 58, 78, 171) Flash (pp. 54, 85) Speaker Tripod Socket DC Coupler Terminal Cover Memory Card / Battery Cover (p. 17) Mode Switch Use the mode switch to change the Shooting mode. You can shoot with the best settings for the scene (p.
Components Guide Screen (LCD Monitor) (pp. 44, 187, 189) Strap Mount (p. 13) HDMI Terminal (p. 134) A/V OUT (Audio/Video Output) / DIGITAL Terminal (pp. 36, 133, 152) 1 (Playback) Button (pp. 28, 119) Indicator (p.
Screen Display Switching the Display You can change the screen display by touching l. Refer to p. 187 for details on information that appears on the screen. Shooting Information Display No Information Display Playback Simple Information Display Detailed Information Display Focus Check Display (p. 126) • Touching while in Playback mode will hide all image information and icons, but you can still switch images (pp. 28, 29). Touch the screen to restore the original display.
Indicator Screen Display in Dark Shooting Conditions The display automatically brightens when shooting in dark conditions, allowing you to check the composition (Night Display function). However, the brightness of the image on the screen, and the brightness of the actual image recorded may be different. Screen noise may appear and the movement of the subject may appear somewhat jagged on the screen. This has no effect on the recorded image.
FUNC. Menu – Basic Operations Commonly used functions can be set with the FUNC. menu. The menu items and options differ depending on the Shooting mode (pp. 192 – 195) or Playback mode (p. 200). Display the FUNC. menu. z Touch ø. Choose a menu item. z Drag up or down the menu on the left, or touch a menu item to choose it. z You can also choose menu items by dragging on the screen outside of the menu. z Touch the menu item you chose again, or touch the menu on the right. Choose an option.
MENU – Basic Operations Various functions can be set from the menus. The menu items are organized under tabs, such as for shooting (4) and playback (1). The options differ depending on the Shooting mode and the Playback mode (pp. 196 – 199). Display the menu. z Touch ø, then touch n. Choose a tab. z Touch a tab, or move the zoom lever (p. 42) left or right to choose a tab. Choose an item. z Drag up or down the screen, or touch an item to choose it.
MENU – Basic Operations Choose an option. z For items that display qr to the left and right, touch qr to change settings. z For items that display a bar, touch the spot on the bar where you want to make the setting. Complete the setting. z Touch Ú. X The normal screen will reappear.
Changing the Sound Settings You can silence or adjust the volume of camera sounds. Muting Sounds Display the menu. z Touch ø, then touch n. Choose [Mute]. z Touch the 3 tab. z Drag up or down the screen to choose [Mute], then touch qr to choose [On]. If you mute camera sounds, the sound will also be muted when playing back movies (p. 33). If you drag up the screen while viewing a movie, the sound will turn on. You can then adjust the volume by dragging up or down the screen.
Adjusting the Screen Brightness You can adjust the brightness of the screen. Display the menu. z Touch ø, then touch n. Choose [LCD Brightness]. z Touch the 3 tab. z Drag up or down the screen to choose [LCD Brightness]. Adjust the brightness. z Touch the point on the bar where you want to change the brightness.
Returning the Camera to Default Settings When you have mistakenly changed a setting, you can reset the camera to the default settings. Display the menu. z Touch ø, then touch n. Choose [Reset All]. z Touch the 3 tab. z Drag up or down the screen to touch [Reset All]. Reset the settings. z Touch [OK]. X The camera will reset to the default settings. Are there functions that cannot be reset? • The [Date/Time] (p. 21), [Language] (p. 22), [Video System] (p. 133), [Time Zone] (p.
Power Saving Function (Auto Power Down) To save battery power, the screen turns off, and the camera shuts down automatically when it is not operated for a certain time. Power Saving during Shooting The screen will turn off approximately 1 minute after you stop operating the camera. After about 2 more minutes, the lens will retract and the power will turn off. When the screen has turned off but the lens has not yet retracted, pressing the shutter button halfway (p.
3 Shooting with Commonly Used Functions This chapter explains how to use common functions, such as the selftimer, and how to turn off the flash. • This chapter assumes that the camera is set to A mode. When shooting in another mode, check which functions are available in that mode (pp. 192 – 195).
Turning the Flash Off You can shoot with the flash turned off. Touch . Choose !. z Touch !. z Touch ! again to make the setting. X Once set, ! will appear on the screen. z To turn the flash back on, follow the steps above to choose What if a flashing . appears? When you press the shutter button halfway in low light conditions where camera shake is likely, a flashing will appear on the screen. Attach the camera to a tripod to prevent it from moving.
Zooming in More Closely on Subjects (Digital Zoom) You can use the digital zoom to zoom up to approximately 18x maximum, and capture subjects that are too far away for the optical zoom to enlarge. However, depending on the recording pixel setting (p. 60) and zoom factor, the images may appear coarse (the zoom factor will appear in blue). Move the zoom lever toward i. z Hold the lever until zooming stops. X Zooming stops at the largest possible zoom factor without image deterioration.
Zooming in More Closely on Subjects (Digital Zoom) Digital Tele-Converter The focal length of the lens can be increased by approximately 1.5x or approximately 2.0x. This enables a faster shutter speed and less chance of camera shake than the zoom (including digital zoom) used by itself at the same zoom factor. However, a recording pixel setting (p. 60) of or will cause images to appear coarse (the zoom factor will appear in blue). Choose [Digital Zoom]. z Touch ø, then touch n. z Touch the 4 tab.
Inserting the Date and Time You can insert the shooting date and time in the lower right corner of an image. Once inserted, however, they cannot be deleted. Be sure to check beforehand that the date and time are correctly set (p. 20). Choose [Date Stamp]. z Touch ø, then touch n. z Touch the 4 tab. z Drag up or down the screen to choose [Date Stamp]. Choose the setting. z Touch qr to choose [Date] or [Date & Time]. z Touching Ú restores the settings screen. X Once set, [DATE] will appear on the screen.
Using the Self-Timer The self-timer can be used to shoot a group photo that includes the photographer. The camera will shoot approximately 10 seconds after the shutter button is pressed. Touch . Choose Ò. z Touch Ò. z Touch Ò again to make the setting. X Once set, Ò will appear on the screen. Shoot. z Press the shutter button halfway to focus on the subject, then press it fully. X When the self-timer starts, the lamp blinks and the self-timer sound plays.
Using the Self-Timer Using the Self-Timer to Prevent Camera Shake The camera will shoot approximately 2 seconds after the shutter button is pressed, preventing any camera shake that occurs when pressing the shutter button. Choose Î. z Follow Steps 1 – 2 on p. 58 to choose Î. X Once set, Î will appear on the screen. z Follow Step 3 on p. 58 to shoot. Customizing the Self-Timer You can set the delay (0 – 30 seconds) and the number of shots (1 – 10 shots). Choose $.
Changing the Recording Pixel Setting (Image Size) You can choose from 4 recording pixel settings. Choose the recording pixel setting. z Touch ø, then drag up or down the menu on the left to choose . Choose an option. z Touch an item you want to set. z If you drag up or down the menu on the right, other items will appear. z Touch the menu item again to complete the setting. X The setting will appear on the screen. z To restore to the original setting, choose in Steps 1 – 2.
Changing the Compression Ratio (Image Quality) Approximate Values for Recording Pixels and Compression Ratio (for 4:3 Aspect Ratios) Recording Pixels Compression Ratio Single Image Data Size (Approx. KB) Number of Shots per Memory Card (Approx. shots) 4 GB 16 GB (Large) 12M/4000x3000 3084 1231 5042 1474 2514 10295 (Medium 1) 6M/2816x2112 1620 2320 9503 780 4641 19007 (Medium 2) 2M/1600x1200 558 6352 26010 278 12069 49420 (Small) 0.
4 Adding Effects and Shooting in Various Conditions This chapter explains how to add effects and how to shoot in various conditions.
Shooting in Various Conditions The camera will select the necessary settings for the conditions in which you wish to shoot when you choose the matching mode. Set the camera to 4 mode. z Set the mode switch to 4. Choose a Shooting mode. z Touch G. z If you touch qr or quickly drag left or right across the screen, other Shooting modes will appear. z Choose the desired shooting mode. X An explanation of the chosen Shooting mode appears on the screen. z Touch [OK] to complete the setting.
Shooting in Various Conditions V Take shots of kids and pets (Kids&Pets) z Lets you capture subjects that move around, such as children and pets, without missing photo opportunities. z Move approximately 1 m (3.3 ft.) or more away from your subject and shoot. Take nightscapes without using a tripod (Handheld NightScene) z Lets you take beautiful snapshots of city nightscenes by combining several continuous shots to reduce camera shake and noise. z When using a tripod, you should shoot in A mode (p. 25).
Shooting in Various Conditions P Take shots of people in snow (Snow) z Lets you take bright, natural-colored shots of people against snowy backgrounds. t Take shots of fireworks (Fireworks) z Lets you take shots of fireworks in vivid colors. • In mode, hold the camera firmly while shooting as multiple images are captured in succession. • In t mode, attach the camera to a tripod to prevent the camera from moving and blurring the image.
Making Short Movies Automatically (Movie Digest) You can make a short movie of a day just by taking still images. Each time you take a picture, the scene just before taking your shot will be recorded as a movie. All the movies recorded that day will be saved as a single file. Choose . z Follow Steps 1 – 2 on p. 64 to choose . Shoot. z Press the shutter button fully to shoot a still image. X A movie of approx. 2 – 4 sec. will be recorded just before the image is taken.
Adding Effects and Shooting You can add various effects to images when shooting. Choose a Shooting mode. z Follow Steps 1 – 2 on p. 64 to choose a Shooting mode. Shoot. Since you may not achieve the expected results with images shot in , , and modes, try taking some test shots first. Shoot images with vivid colors (Super Vivid) z Lets you take shots with vivid, intense colors. Take posterized shots (Poster Effect) z Lets you take shots that look like an old poster or illustration.
Adding Effects and Shooting Shoot with the Effects of a Fish-Eye Lens (Fisheye Effect) Lets you shoot with the distorting effect of a fish-eye lens. Choose . z Follow Steps 1 – 2 on p. 64 to choose . Choose an effect level. z Touch . X [Effect Level] will appear on the screen. z Touch qr to choose an effect level, then touch Ú. X You can check the effect on the screen. Shoot.
Adding Effects and Shooting Take Shots That Look Like a Miniature Model (Miniature Effect) Blurs chosen portions in the top and bottom of an image to produce the effect of a miniature model. Choose . z Follow Steps 1 – 2 on p. 64 to choose X A white frame (the area that will not be blurred) appears on the screen. Choose the area to keep in focus. z Touch the screen or drag the white frame up or down to change the area to keep in focus.
Adding Effects and Shooting Special Effects for Night Backgrounds (Creative Light Effect) Light displays and other points of light in the night backgrounds behind your subject can be changed into 6 different shapes. Be sure to use the flash when shooting. Choose . z Follow Steps 1 – 2 on p. 64 to choose . Choose a shape and size. z Touch . X [Select Effect] will appear on the screen. z Touch the desired shape. z Touch op to choose a size, then touch Ú. Shoot.
Adding Effects and Shooting In some shooting conditions, such as when shooting moving points of light, the chosen shape may not show, and the brightness may be different than expected. Changing the Color and Shooting You can change the look of an image when shooting. However, depending on shooting conditions, the image may become coarse, or the colors may not come out as expected. Color Accent You can choose to retain a single color and change the rest to black and white in a composition. Choose T.
Adding Effects and Shooting Color Swap You can swap one color in an image for another when recording it. You can only swap one color. Choose Y. z Follow Steps 1 – 2 on p. 64 to choose Y. Touch . X The unchanged image and the Color Swap image will alternately display. z The default setting is to change green to gray. Specify the color to be swapped. z Position the center frame so it is filled with the color you want and touch the left frame that appears in the lower left of the screen.
Adding Effects and Shooting • Using the flash may cause unexpected results in this mode. • Under some conditions, the image may appear coarse. Shooting in Monochrome You can shoot images in black and white, sepia or blue and white. Choose . z Follow Steps 1 – 2 on p. 64 to choose . Choose a color tone. z Touch . X [Color Tone] will appear on the screen. z Touch qr to choose an effect, then touch Ú. X You can check the color tone on the screen. Shoot. B/W Shoots in black and white.
Adding Effects and Shooting Shoot with the Effects of a Toy Camera (Toy Camera Effect) This effect darkens and blurs the corners of the image, and changes the overall color so that it looks like an image shot with a toy camera. Choose . z Follow Steps 1 – 2 on p. 64 to choose . Choose a color tone. z Touch . X [Color Tone] will appear on the screen. z Touch qr to choose an effect, then touch Ú. X You can check the color tone on the screen. Shoot.
Detecting a Face and Shooting (Smart Shutter) Detecting a Smile and Shooting The camera will shoot, even without pressing the shutter button, when it detects a smile. Choose . z Choose in Steps 1 – 2 on p. 64, then touch . z Touch , then touch Ú. X The camera will enter shooting preparation. Point the camera at a person. z Each time the camera detects a smile it will shoot after the lamp lights. will pause smile detection. Touch to resume smile detection.
Detecting a Face and Shooting (Smart Shutter) Using the Wink Self-Timer Point the camera at a person and press the shutter button fully. The camera will shoot approximately two seconds after it detects a wink. Choose . z Choose touch z Touch in Steps 1 – 2 on p. 64, then . , then touch Ú. Compose the shot and press the shutter button halfway. z Touch a face displayed on the screen to choose a person to wink (Touch AF). z Confirm that a green frame appears around the face of the person who will wink.
Detecting a Face and Shooting (Smart Shutter) Changing the number of shots After touching on the screen in Step 1, touch op to change the number of shots. Touch Ú to complete the setting. • Shutting both eyes will also be detected as a wink. • If a wink is not detected, the shutter will release approximately 15 seconds later. • If there are no people in the shot when the shutter button is pressed fully, the camera will shoot after a person enters the shot and winks.
Detecting a Face and Shooting (Smart Shutter) Join the subjects and look at the camera. X When the camera detects a new face, the lamp and self-timer sound will speed up (the lamp remains lit when the flash will fire), and two seconds later the shutter will release. z To cancel shooting with the timer after countdown has started, touch the screen. Changing the number of shots After touching in the screen in Step 1, touch op to change the number of shots, then touch Ú to complete the setting.
High-Speed Continuous Shooting (High-speed Burst) You can shoot continuously at a maximum speed of approximately 8.2 images/second while the shutter button is pressed fully and held. Choose . z Follow Steps 1 – 2 on p. 64 to choose , Shoot. X As long as you hold the shutter button down, the camera will shoot successive images. • The recording pixel setting will be fixed at (1984 x 1488 pixels). • The focus, brightness and white balance will be set with the first shot.
Capturing the Best Facial Expressions (Best Image Selection) The camera takes 5 continuous shots, then detects various aspects of the shot such as facial expressions, and saves only one picture detected as the best. Choose . z Follow Steps 1 – 2 on p. 64 to choose . Shoot. X When the shutter button is pressed fully, the camera takes five continuous shots, and saves one picture only. • The recording pixel setting will be fixed at (1984 x 1488 pixels).
5 Choosing Settings Yourself In this chapter you will learn how to use the various functions in G mode to progressively advance your shooting skills. • This chapter assumes that you have set the mode switch to 4 and the camera is in G mode. • G stands for Program AE. • Before attempting to shoot using a function explained in this chapter in modes other than G mode, check if the function is available in those modes (pp. 192 – 197).
Shooting in Program AE You can choose the settings for various functions to suit your preferences. AE stands for Auto Exposure. The focusing range is approximately 5 cm (2.0 in.) – infinity at maximum wide angle (j), and approximately 40 cm (1.3 ft.) – infinity at maximum telephoto (i). Enter G mode. z Follow Steps 1 – 2 on p. 64 to choose G. Adjust the settings according to your purposes (pp. 85 – 105). Shoot.
Adjusting the Brightness (Exposure Compensation) You can adjust the standard exposure set by the camera in 1/3-stop increments in the range of -2 to +2. Enter Exposure Compensation mode. z Touch #. Adjust the brightness. z While looking at the screen, touch the bar, or drag it left or right, to adjust the brightness, then touch Ú. X The exposure compensation amount will appear on the screen. You can also make settings in the FUNC. menu that appears when you touch ø.
Adjusting the White Balance The white balance (WB) function sets the optimal white balance for natural looking colors to match the shooting conditions. Choose the white balance function. z Touch ø, then drag up or down the menu on the left to choose . Choose an option. z Touch an item you want to set. z If you drag up or down the menu on the right, other items will appear. z Touch the menu item again to complete the setting. X The setting will appear on the screen.
Adjusting the White Balance Custom White Balance You can adjust the white balance to match the light source at the shooting location. Make sure that you set the white balance under the light source of the actual scene you will shoot. z Follow Step 2 on p. 86 to choose . z Make sure the entire screen is filled with a plain, white colored subject, then touch on the right. X The tint on the screen will change when white balance data is set.
Changing the ISO Speed Choose the ISO speed. z Touch ø, then drag up or down the menu on the left to choose . Choose an option. z Touch an item you want to set. z If you drag up or down the menu on the right, other items will appear. z Touch the menu item again to complete the setting. X The setting will appear on the screen. Automatically adjusts the ISO speed to the Shooting mode and shooting conditions. Low For shooting outdoors, in fine weather conditions.
Correcting the Brightness and Shooting (i-Contrast) The camera can detect areas in the scene, such as faces or backgrounds, that are too bright or dark and automatically adjust them to the optimum brightness when shooting. Also, when the overall image is lacking in contrast, the camera will automatically correct the image for a sharper impression when shooting. Choose [i-Contrast]. z Touch ø, then n to choose the 4 tab. Touch [i-Contrast], then touch qr to choose [Auto].
Changing the Aspect Ratio You can change the width to height ratio of an image. Choose . z Touch ø, then drag up or down the menu on the left to choose . Choose an option. z Touch an item you want to set. z If you drag up or down the menu on the right, other items will appear. z Touch the menu item again to complete the setting. X Once set, the aspect ratio of the screen will change. The same aspect ratio as the screen of this camera, used for displaying on widescreen HD TVs.
Continuous Shooting You can shoot continuously at a maximum speed of approximately 3.4 images/second while the shutter button is pressed fully and held. Choose a Drive mode. z Touch ø, then drag up or down the menu on the left to choose . Choose an option. z Touch W. z Touch W again to make the setting. X Once set, W will appear on the screen. Shoot. X As long as you hold the shutter button down, the camera will shoot successive images. • Cannot be used with the self-timer (pp. 58, 59).
Changing the Tone of an Image (My Colors) You can change the tone of an image, for example to sepia or black and white, when shooting. Choose My Colors. z Touch ø, then drag up or down the menu on the left to choose . Choose an option. z Touch an item you want to set. z If you drag up or down the menu on the right, other items will appear. z Touch the menu item again to complete the setting. X The setting will appear on the screen.
Changing the Tone of an Image (My Colors) Custom Color The contrast, sharpness, color saturation, red, green, blue, and skin tones in an image can be chosen and set at 5 different levels. z Follow Step 2 on p. 92 to choose . z Touch on the right side of the screen. z Touch qr to choose an item, then touch the point on the bar where you want to make a setting. z The more to the right, the stronger/darker (skin tone) the effect gets, the more to the left, the weaker/lighter (skin tone) the effect gets.
Shooting Close-ups (Macro) You can shoot an object at a close distance or even shoot extreme close-ups of it. The focusing range is approximately 3 – 50 cm (1.2 in. – 1.6 ft.) from the end of the lens at maximum wide angle (j). Choose e. z Touch ø, then drag up or down the menu on the left to choose . z Touch e, then touch e again to complete the setting. X Once set, e will appear on the screen.
Changing the AF Frame Mode You can change the AF (Auto Focus) frame mode to match the scene you want to shoot. Choose [AF Frame]. z Touch ø, then n to choose the 4 tab. Touch [AF Frame], then touch qr to choose an option. Face AiAF • Detects people’s faces and sets the focus, exposure (evaluative metering only) and white balance ( only). • When the camera is pointed at subjects, a white frame appears on the face the camera judges to be the main subject, and gray frames (max.
Changing the AF Frame Mode Fixed Frame A single AF frame will be used. This is effective for focusing on a specific point. You can reduce the AF frame size • Touch ø, then n to choose the 4 tab, then touch [AF Frame Size] and choose [Small]. • The AF frame is set to [Normal] when using the digital zoom (p. 55) or digital tele-converter (p. 56). If the camera cannot focus when you press the shutter button halfway, the AF frame will turn yellow and will appear.
Magnifying the Focal Point If you press the shutter button halfway, the AF frame will magnify and you can check the focus. Choose [AF-Point Zoom]. z Touch ø, then n to choose the 4 tab. Touch [AF-Point Zoom], then touch qr to choose [On]. Check the focus. z Press the shutter button halfway. X In [Face AiAF] (p. 95), the face detected as the main subject will appear magnified. X In [Fixed frame] (p. 96), the contents of the AF frame will appear magnified.
Choosing the Subject to Focus On (Touch AF) You can choose a specific subject or person's face, or a location on the screen, to focus on and shoot. Choose the subject, face or location to focus on. z Touch the subject or person shown on the screen. X When the AF frame mode is set to [Face AiAF], the camera will beep and display when it detects the subject. The camera will continue to focus even if the subject moves.
Shooting with the AF Lock The focus can be locked. After locking the focus, the focal distance will not change even when you release your finger from the shutter button. Lock the focus. z Keep the shutter button pressed halfway and touch inside the frame shown on the left. X The focus locks and % appears on the screen. z If you release your finger from the shutter button and touch the screen again, AF lock will cancel, and % will disappear. Compose the scene and shoot.
Shooting with Servo AF While the shutter button is pressed halfway, the focus and exposure will continue to adjust, allowing you to take pictures of moving subjects without missing a shot. Choose [Servo AF]. z Touch ø, then n and choose the 4 tab and touch [Servo AF], then touch qr to choose [On]. Focus. z The focus and exposure will be maintained where the blue AF frame appears while you press the shutter button halfway. • The camera may not be able to focus in some conditions.
Changing the Metering Method You can change the metering method (brightness measuring function) to match the shooting conditions. Choose the metering method. z Touch ø, then drag up or down the menu on the left to choose . Choose an option. z Touch an item you want to set. z Touch the menu item again to complete the setting. X The setting will appear on the screen. Evaluative For standard shooting conditions, including back lit shots. Automatically adjusts the exposure to match the shooting conditions.
Shooting with the AE Lock You can lock the exposure and shoot, or set the focus and exposure separately to shoot. AE stands for “Auto Exposure”. Lock the exposure. z Point the camera toward the subject and touch the lower part of the screen (inside the frame shown on the left) while pressing the shutter button halfway. X When & appears, the exposure will be locked. z If you release your finger from the shutter button and touch the screen again, & will cancel, and & will disappear.
Shooting with Slow Synchro You can make the main subject, such as people, appear bright by having the camera provide the appropriate illumination with the flash. At the same time, you can use a slow shutter speed to brighten the background that the light from the flash cannot reach. Choose …. z Touch , then touch …. z Touch … again to make the setting. X Once set, … will appear on the screen. Shoot. z Even if the flash fires, ensure that the main subject does not move until the shutter sound ends.
Red-Eye Correction You can automatically correct red-eye that occurs in images taken with the flash. Choose [Flash Settings]. z Touch ø, then n and choose the 4 tab and touch [Flash Settings]. Choose the setting. z Touch [Red-Eye Corr.], then touch qr to choose [On]. X Once set, Œ will appear on the screen. Red-eye correction may be applied to areas other than red eyes. For example, when red make-up has been used around eyes. You can also correct recorded images (p. 150).
Checking for Shut Eyes When the camera detects the possibility that people have their eyes shut, appears on the screen. Choose [Blink Detection]. z Touch ø, then n to choose the 4 tab. Touch [Blink Detection], then touch qr to choose [On]. Shoot. X When a person with shut eyes is detected, a frame and appear on the screen. • This function is only available for the last image shot when you have set the camera to 2 or more shots in or $ mode. • Not available in W mode.
6 Getting More Out of Your Camera This chapter explains how to shoot in M and B modes.
Setting the Shutter Speed You can set the shutter to the speed at which you want to shoot. The camera will set the appropriate aperture value for the shutter speed you set. M stands for “Time value”. Choose a Shooting mode. z Follow Steps 1 – 2 on p. 64 to choose M. Adjust the setting. z Touch the [1/125]. z Touch the bar, or drag it left or right, to choose a shutter speed, then touch Ú. Shoot.
Setting the Aperture Value What if the aperture value appears in orange? If the aperture value appears in orange when the shutter button is pressed halfway, the scene has exceeded the correct exposure limits. Adjust the shutter speed until the aperture value appears in white (Safety shift can also be used (p. 110)). Setting the Aperture Value You can set the aperture to a value at which you want to shoot. The camera will set the appropriate shutter speed for the aperture value you set.
Setting the Aperture Value What if the shutter speed appears in orange? If the shutter speed appears in orange when the shutter button is pressed halfway, the scene has exceeded the correct exposure limits. Adjust the aperture value until the shutter speed appears in white. Safety shift can also be used (see below).
7 Using Various Functions for Shooting Movies This chapter serves as a more advanced version of the “Shooting Movies” and “Viewing Movies” sections in Chapter 1, and explains how to use various functions for shooting and viewing movies. • This chapter assumes that you have set the mode switch to 4. • The latter half of the chapter explaining movie playback and editing assumes that you have pressed the 1 button to enter Playback mode.
Shooting Various Kinds of Movies Just as with still images, you can let the camera select the best settings for the scene or add various effects while shooting movies. Choose a Shooting mode. z Follow Steps 1 – 2 on p. 64 to choose a Shooting mode. Shoot. z Touch . X Depending on the Shooting mode or movie image quality (p. 116) you choose, black bars may appear on the sides of the screen. These areas will not be recorded when shooting. z To stop shooting the movie, touch . I Portrait p.
Shoot Movies That Look Like a Miniature Model (Miniature Effect) You can shoot movies that look like moving miniature models. You create the miniature model effect by choosing the upper and lower portions of the scene that will be blurred, and the playback speed, which makes people and objects in the scene move quickly during playback. Audio will not be recorded. Choose . z Follow Steps 1 – 2 on p. 64 to choose . X A white frame (the area that will not be blurred) appears on the screen.
Shooting Super Slow Motion Movies Playback Speeds and Estimated Playback Times (for 1 Min. Clips) Speed Playback Time Approx. 12 sec. Approx. 6 sec. Approx. 3 sec. • The image quality will be fixed at when an aspect ratio of is chosen, and when an aspect ratio of is chosen (p. 90). • If you touch in Step 2, the frame will switch to vertical orientation and you can change the area to keep in focus by touching the screen. Touch again to return the frame orientation to horizontal.
Shooting Super Slow Motion Movies Shoot. z Touch . X The bar showing the shooting time will appear. Maximum clip length is approx. 30 sec. z To stop shooting the movie, touch . Frame Rates and Playback Times (for 30 Sec. Clips) Frame Rate Playback Time 240 fps Approx. 4 min. 120 fps Approx. 2 min. Viewing super slow motion movies • The movie will play back in slow motion when you follow Steps 1 – 3 on p. 33. • You can use the included software to change the playback speed of movies shot in mode.
Changing the Image Quality You can choose among 4 different image quality settings. Choose the image quality setting. z Touch ø, then drag up or down the menu on the left to choose . Choose an option. z Touch an item you want to set. z Touch the menu item again to complete the setting. X The option you set will appear on the screen. Image Quality and Shooting Time per Memory Card Image Recording Pixels, Quality Frame Rate Content 1920 x 1080 pixels, For shooting full 24 frames/sec.
Other Shooting Functions The following functions can be used in the same way as for still images. Some functions, however, may not be available or may not have an effect depending on the Shooting mode. • Zooming in More Closely On Subjects The sound of zoom operations will be recorded. • Using the Self-Timer (p. 58) • Using the Self-Timer to Prevent Camera Shake (p. 59) • Adjusting the White Balance (p. 86) • Changing the Tone of an Image (My Colors) (p. 92) • Shooting with the AF Lock (p.
Editing Choose a portion to delete. z Touch [Cut Beginning] or [Cut End]. z [Cut Beginning] will delete from the beginning of the movie to the currently displayed scene. z [Cut End] will delete from the currently displayed scene to the end of the movie. Save the edited movie. z Touch [New File]. X The movie will be saved as a new file. z To cancel editing, touch [Cancel]. z To reset the editing range, touch Ú.
8 Using Various Playback and Editing Functions This chapter explains various ways to play back and edit images. • Press the 1 button to enter Playback mode before operating the camera. • It may not be possible to play back or edit images that have been edited on a computer, have had their file names changed, or have been taken on a different camera. • The edit function (pp. 145 – 150) cannot be used if the memory card does not have enough free space available.
Quickly Searching Images Searching Images Using Index Display Displaying multiple images at the same time lets you quickly find the image you want. Display images in an index. z After touching , touch the number of images you want to display. X Images will display in an index. z You can also move the zoom lever toward g to display images in an index. Move the zoom lever toward k to reduce the number of images. Switch the displayed images.
Quickly Searching Images Searching Images by Scrolling Dragging across the screen will display images in a line letting you quickly search them. You can also jump by the shooting date (Scroll Display). Choose an image. z You can switch between images in single image playback by dragging across the screen. Continuously dragging quickly across the screen will display the screen on the left (Scroll Display). In this display, drag across the screen to choose images.
Quickly Searching Images Viewing Movies Made with Movie Digest You can select movies made in mode (p. 67) by date for viewing. Choose . z After touching ø, drag the menu appearing on the left side of the screen up or down to choose , then touch the menu item again. Choose a movie date. z Touch a date to choose it. Play the movie. z Touch the date chosen in Step 2. X The movie will play.
Viewing Images in Filtered Playback When there are many images on the memory card, you can filter and display them by a specified filter. You can also protect (p. 137) or delete (p. 139) all images at once while filtered. Choose ‚. z Touch ø, then drag up or down the menu to the left to choose ‚. Choose a filter. z Touch an item you want to set. z If you drag up or down the menu on the right, other items will appear. z Touch the item you chose again to complete the setting. View the filtered images.
Viewing Slideshows Filtered playback In filtered playback (Step 3), you can view filtered images with “Quickly Searching Images” (p. 120), “Viewing Slideshows” (p. 124), and “Magnifying Images” (p. 127). You can process all filtered images at once while performing operations in “Protecting Images” (p. 137), “Erasing All Images” (p. 139), or “Choosing Images for Printing (DPOF)” (p. 159), by choosing all of the filtered images. However, if you change the category (p.
Viewing Slideshows Changing Settings You can set a slideshow to repeat, or change transition effects and the time that slideshow images are displayed. You can choose from 6 transition effects when switching between images. Choose [Slideshow]. z Touch ø, then n to choose the 1 tab, and touch [Slideshow]. Choose a setting. z Touch an item, then touch qr to make the setting. z If you touch [Start], the slideshow starts with your settings. z Touching the screen during playback will restore the menu screen.
Checking the Focus You can magnify the area of a recorded image that was inside the AF Frame to check the focus. Touch l to switch the focus check display (p. 44). X A white frame will appear where the AF frame was when the focus was set. X A gray frame will appear on a face detected during playback. X The area within the orange frame appears magnified. Switch frames. z Touch the lower right image, or move the zoom lever toward k once. X The screen shown on the left will appear.
Magnifying Images Magnify an image. z When you touch the screen, the image will magnify and and will appear. z If you keep your finger on the screen, the Approximate Location of Displayed Area display will continue to zoom on that part of the image up to a factor of 10x. z You can also zoom in or out on images by touching or . If you touch and hold or , the display will continue zoom in or out on the image. z If you drag across the screen, you can move the location of the displayed area.
Viewing Each Image in a Group Grouped images taken in mode (p. 80) can also be viewed individually. Choose an image group. z Drag left or right across the screen to choose an image that displays touch . , then View each image in the group. z If you drag left or right across the screen only the images in the group will be displayed. z Touch Ú to exit group playback. Group playback In group playback (Step 2 above), you can use the FUNC. menu functions that appear when you touch ø, as well as search (p.
Viewing Each Image in a Group Ungrouping Images Grouped images taken in individually. mode can be ungrouped and viewed Choose [Group Images]. z Touch ø and then n to choose [Group Images] in the 1 tab. Choose a setting. z Touch qr to choose [Off]. z Touch Ú to complete the setting and restore single image playback. mode are ungrouped and appear individually. z To regroup the images, follow the steps above and select [On].
Displaying Various Images (Smart Shuffle) The camera will choose four images based on the displayed image. If you choose one of those images, the camera will select four more images letting you enjoy playing back images in an unexpected order. This will work best if you take many shots of various scenes. Choose . z Touch ø, then drag up or down the screen to choose . X Four images will appear as possibilities. Choose an image. z Touch the image you want to view next.
Changing Image Transitions You can choose from 3 transition effects when switching between images in single image playback. Choose [Transition]. z Touch ø and then n to choose [Transition] in the 1 tab, then touch qr to choose an effect. Easy Operations with Touch Actions In single image playback, you can quickly and easily call up functions that have been registered to each of four set dragging patterns (Touch Actions). Use a Function Registered to z Drag across the screen as shown.
Easy Operations with Touch Actions Changing Touch Actions Registered Functions You can register the functions you want to use easily to each of the drag patterns. Choose [Set Touch Actions]. z Touch ø, then n to choose the 1 tab, and touch [Set Touch Actions]. Register a function to a drag pattern. z Drag up or down the screen to choose a drag pattern. z Touch qr to choose the function to register. Functions that Can be Registered Favorites Tag or untag images as favorites.
Viewing Images on a TV You can connect the camera to a TV to view images you have shot. The following functions are available when you perform operations with the camera: • Switching images Drag across the screen, or tap the camera lightly with your finger (pp. 28, 29). • Movie playback (p. 33) • Magnification (p. 127) Move the zoom lever toward k. • Group playback (p. 128) • Touch Actions (p. 131) Smart Shuffle and image erase cannot be called up.
Viewing Images on a TV Turn on the camera. z Press the 1 button to turn on the camera. X The image will appear on the TV (nothing will appear on the screen of the camera). z Use the camera screen to perform operations. z After you finish, turn off the camera and TV, and unplug the cable. What if the images don’t display correctly on the TV? Images will not display correctly if the camera’s video output setting (NTSC/PAL) does not match the TV system.
Viewing Images on a TV Using a TV Remote to Control the Camera When you connect the camera to an HDMI CEC compatible TV, you can use the TV’s remote control to operate the camera and play back images or view slideshows. You may need to make settings on some TVs. For details, refer to the user guide supplied with the TV. Choose [Ctrl via HDMI]. z Touch ø and then n to choose [Ctrl via HDMI] in the 3 tab, then touch qr to choose [Enable]. Connect the camera to the TV. z Follow Steps 1 – 2 on p.
Viewing Images on a TV Summary of the Camera Control Panel Displayed on the TV . Return Closes the menu. Group playback Displays groups of High-speed Burst images (only appears when grouped images are chosen). Play movie Plays a movie (only appears when a movie is chosen). Slideshow Plays back images automatically. During playback, you can press the remote control’s qr buttons to switch images. Index playback Displays images in an index.
Protecting Images You can protect important images so that they cannot be accidentally erased with the camera (pp. 30, 139). Protect the image. z Touch ø, then drag up or down the menu to the left to choose :. X Once set, will appear on the screen. z To unlock an image, touch ø again, then drag up or down the screen to choose :. If you format the memory card (pp. 23, 165), protected images will also be erased. Protected images cannot be erased with the camera’s erase function.
Protecting Images Choosing Images Individually Choose [Select]. z Follow Step 2 on p. 137 to touch [Select]. Choose images. z Drag on the screen to choose an image, then touch the screen. will appear on the screen. z Touching the screen again deselects the image, and disappears. z To choose multiple images, repeat the above operation. X Once set, Protect the image. z If you touch Ú, a confirmation screen will appear. z Touch [OK]. X The images will be protected.
Erasing All Images Choose All Images Choose [All Images]. z Follow Step 2 on p. 137 to touch [All Images]. Protect images. z Touch [Protect]. You can unlock groups of protected images if you choose [Unlock] in Step 2. Erasing All Images You can choose images and then erase them in groups. Since erased images cannot be recovered, exercise adequate caution before erasing. Protected images (p. 137) cannot be erased. Choose a Selection Method Choose [Erase].
Erasing All Images Choosing Images Individually Choose [Select]. z Follow Step 2 on p. 139, touch [Select]. Choose an image. z Drag across the screen to choose an image, then touch the screen. will appear on the screen. z Touching the screen again deselects the image, and disappears. z To choose multiple images, repeat the above operation. X Once set, Erase. z If you touch Ú, a confirmation screen will appear. z Touch [OK]. To choose multiple images, touch touch the images you want.
Tagging Images as Favorites When you tag images as favorites, you can easily categorize just those images. You can also filter out just those images for viewing, protecting or erasing (p. 123). Make the setting. z Touch ø, then drag up or down the menu to the left to choose X Once set, . will appear on the screen. z To unlock an image, touch ø again, then drag up or down the menu to the left to choose . Using the Menu Choose [Favorites]. z Touch ø, then n to choose the 1 tab, and touch [Favorites].
Tagging Images as Favorites Complete the setting. z If you touch Ú, a confirmation screen will appear. z Touch [OK]. If you switch to Shooting mode or turn off the power before completing the setting in Step 3, images will not be tagged as favorites. • If you use Windows 7 or Windows Vista and transfer tagged images to the computer, they will be given a star rating of 3 ( ) (except for movies). • You can also use Touch Actions to tag images as favorites (p. 131).
Organizing Images by Category (My Category) You can organize images into categories. You can display the images in a category in filtered playback (p. 123) and process all images at once by using the functions below. • “Viewing Slideshows” (p. 124), “Protecting Images” (p. 137), “Erasing All Images” (p. 139), “Choosing Images for Printing (DPOF)” (p. 159) • Images are automatically categorized by shooting condition as they are shot. - : Images with detected faces, or images shot in I or V.
Rotating Images Complete the setting. z If you touch Ú, a confirmation screen will appear. z Touch [OK]. If you switch to Shooting mode or turn off the power before completing the setting in Step 3, images will not be tagged as My Category. Rotating Images You can change the orientation of an image and save it. Choose \. z Touch ø, then drag up or down the menu to the left to choose \. Rotate the image. z Touch or and the image will rotate in the chosen direction in 90° increments.
Resizing Images You can resize images to a lower pixel setting and save the resized image as a separate file. Choose [Resize]. z Touch ø, then n to choose the 1 tab, and touch [Resize]. Choose an image. z Drag across the screen to choose an image, then touch [OK]. Choose an image size. z Touch , or , then touch [OK]. X [Save new image?] will appear on the screen. Save the new image. z Touch [OK]. X The image will be saved as a new file. Display the new image.
Trimming You can cut out a portion of a recorded image and save it as a new image file. Choose [Trimming]. z Touch ø, then n to choose the 1 tab, and touch [Trimming]. Choose an image. z Drag across the screen to choose an Trimming Area image, then touch [OK]. Adjust the trimming area. X A frame will appear around the portion of the image to be trimmed.
Trimming • Images recorded at a pixel setting of (p. 61), or images resized to (p. 145) cannot be edited. • Images that can be trimmed will have the same width and height ratio after trimming. • The number of recorded pixels in a trimmed image will be smaller than before trimming. • Movies cannot be edited.
Adding Effects with the My Colors Function You can change the color of an image and save it as a separate image. Refer to p. 92 for details on each menu item. Choose [My Colors]. z Touch ø, then n to choose the 1 tab, and touch [My Colors]. Choose an image. z Drag across the screen to choose an image, then touch [OK]. Choose an option. z Touch an option. z Touch qr to display other available options. z Touch [OK]. X The [Save new image?] screen will appear. Save as a new image and display.
Correcting the Brightness (i-Contrast) The camera can detect areas in an image, such as faces or backgrounds, that are too dark and automatically adjust them to the optimum brightness. Also, when the overall image is lacking in contrast, the camera will automatically correct the image for a sharper impression. You can choose from 4 levels of correction, and save the image as a new file. Choose [i-Contrast]. z Touch ø, then n to choose the 1 tab, and touch [i-Contrast]. Choose an image.
Correcting the Red-Eye Effect You can automatically correct red eyes in images and save them as new files. Choose [Red-Eye Correction]. z Touch ø, then n to choose the 1 tab, and touch [Red-Eye Correction]. Choose and correct the image. z Drag across the screen to choose an image, then touch [OK]. X Red-eye detected by the camera will be corrected and a frame will appear around the corrected portion. z You can magnify or reduce the size of the image using the procedures in “Magnifying Images” (p. 127).
9 Printing This chapter explains how to choose images for printing, and print using a Canon-brand PictBridge compliant printer (sold separately). Canon-Brand PictBridge Compliant Printers • This chapter uses Canon-brand SELPHY CP series printers in the explanations. The displayed screens and available functions will differ depending on the printer. Please also refer to the Printer User Guide.
Printing Images Easy Print You can easily print the pictures you take by connecting the camera to a PictBridge compliant printer (sold separately) using the supplied interface cable (p. 2). Turn off the camera and printer. Connect the camera to the printer. z Open the cover and insert the cable’s small plug firmly into the camera terminal in the direction shown. z Insert the cable’s large plug into the printer. For connection details, refer to the user guide provided with the printer. Turn on the printer.
Printing Images Print images. z Touch [Print]. X Printing will start. z If you want to print additional images, repeat Steps 5 and 6 after printing has completed. z After printing has completed, turn off the camera and printer, and unplug the interface cable. • Refer to p. 40 for Canon-brand PictBridge compliant printers (sold separately). • Index printing is not available on certain Canon-brand PictBridge compliant printers (sold separately).
Printing Images Making Print Settings Connect the camera to the printer. z Follow Steps 1 – 6 on p. 152 to display the screen on the left. Choose a menu option. z Touch an item to choose it. Choose the option settings. z Touch qr to choose the option setting. — No. of Copies Choose the number of copies. Default Follows the printer’s settings. Date Prints the date. File No. Both Prints the file number. Prints both the date and file number. Off — Default Follows the printer’s settings.
Printing Images Trimming and Printing (Trimming) You can cut out a portion of an image for printing. Choose [Trimming]. z Follow Steps 1 – 2 on p. 154 to choose [Trimming]. X A frame will appear around the portion of the image to be trimmed. Choose the trimming area. z If you move the zoom lever, you can change the frame size. z Drag the frame to change its position. z Touch to rotate the frame. z Touch [OK] to complete the setting. Print images. z Follow Step 7 on p. 153 to print.
Printing Images Choosing the Paper Size and Layout for Printing Choose [Paper Settings]. z Follow Steps 1 – 2 on p. 154 to choose [Paper Settings]. Choose a paper size. z Touch an option to choose it, then touch [Next]. Choose the paper type. z Touch an option to choose it, then touch [Next]. Choose the layout. z Drag up or down the screen to choose a layout. z Touch qr to set the number of prints when [N-up] is chosen. z Touch [OK]. Print images.
Printing Images Available Layout Options Default Follows the printer’s settings. Bordered Prints with a border. Borderless Prints without a border. N-up Selects how many copies of an images are printed on a sheet. ID Photo Prints ID photos. Only images with the same resolution as the camera’s L (Large) recording pixel setting and a 4:3 aspect ratio can be chosen. Fixed Size Choose the print size. Choose from 3.5 x 5 in., postcard and wide sized prints. Printing ID Photos Choose [ID Photo].
Printing Images Printing Movies Connect the camera to the printer. z Follow Steps 1 – 6 on p. 152 to choose a movie and display the screen on the left. Choose a printing method. z After touching , touch qr to choose a printing method. Print images. Printing Methods for Movies Single Prints currently displayed scene as a still image. Sequence Prints a sequence of images from a specified scene on a single sheet of paper.
Choosing Images for Printing (DPOF) You can choose up to 998 images on a memory card for printing and specify settings such as the number of copies so that they can be printed together (p. 162) or processed at a photo developer service. These selection methods comply with the DPOF (Digital Print Order Format) standards. Movies cannot be chosen. Adding Images to a Print List with the FUNC. Menu You can add images to the print list (DPOF) directly after shooting or during playback in the FUNC. menu.
Choosing Images for Printing (DPOF) Print Settings You can set the print type, date and file number. These settings apply to all images chosen for printing. Choose [Print Settings]. z Touch ø, then n to choose the 2 tab, and touch [Print Settings]. Choose a setting. z Touch op to choose and set an option. z Once you touch Ú, the settings will be made, and the menu screen will reappear. Standard Print Type Date File No. Clear DPOF data Prints 1 image per page.
Choosing Images for Printing (DPOF) Choosing the Number of Copies Choose [Select Images & Qty.]. z Touch ø, then n to choose the 2 tab, and touch [Select Images & Qty.]. Choose an image. z Drag left or right across the screen to choose an image. X You will be able to set the number of print copies. z For [Index], touch the screen. Once chosen, will appear. If you touch inside the frame again, will disappear. Set the number of prints. z Touch op to set the number of prints (maximum 99).
Choosing Images for Printing (DPOF) Set All Images to Print Once Choose [Select All Images]. z Follow Step 1 on p. 161 to touch [Select All Images]. Make print settings. z Touch [OK]. Clearing All Selections Choose [Clear All Selections]. z Follow Step 1 on p. 161 to touch [Clear All Selections]. All selections will be cleared. z Touch [OK]. Printing chosen images (DPOF) • When there are images added to the print list (pp.
10 Customizing Camera Settings You can customize various settings to suit your shooting preferences. The first part of this chapter explains convenient and commonly used functions. The latter part explains how to change shooting and playback settings to suit your purposes.
Changing Camera Settings You can customize convenient and commonly used functions from the 3 tab (p. 47). Changing Sounds You can change each of the camera’s operation sounds. z Touch [Sound Options]. z Drag up or down the screen to choose an option, then touch qr to choose a setting. 1 Preset sounds (cannot be modified) 2 Preset sounds You can use the included software to change the sounds (p. 2). Even if you change the shutter sound, it will have no effect in (p. 80).
Changing Camera Settings Low Level Memory Card Formatting Perform low level formatting when [Memory card error] appears, the camera does not operate properly, you think that the recording/reading speed of a memory card has dropped, or recording suddenly stops while shooting a movie. As you cannot retrieve the erased data, exercise adequate caution before formatting the memory card. Display the [Format] screen. z Follow Steps 1 and 2 on p. 23. Start the low level format.
Changing Camera Settings Changing the Start-up Screen You can change the start-up screen that appears when you turn on the camera. z Touch [Start-up Image]. z Touch an option. No start-up image 1 Preset images (cannot be modified) 2 Preset images You can set recorded images, and use the included software to change the images. Registering Recorded Images as the Start-up Screen When you press the 1 button and set the camera to Playback mode, you can register an image. z Touch [Start-up Image].
Changing Camera Settings Changing the Screen Color z Choose [Color Option], then touch qr to choose an option. Changing the File Number Assignment Images you shoot are automatically assigned file numbers in the order they were taken, from 0001 – 9999, and saved to folders of up to 2,000 images. You can change the file number assignment. z Choose [File Numbering], then touch qr to choose an option.
Changing Camera Settings Creating Folders by Shooting Date Images are saved into folders created each month, however, you can also create folders by shooting date. z Choose [Create Folder], then touch qr to choose [Daily]. z Images will be saved into folders created on each shooting date. Changing the Lens Retract Time For safety reasons, the lens retracts about 1 minute after pressing the 1 button when in a Shooting mode (p. 28).
Changing Camera Settings Setting the Screen Shut-Off Time You can adjust the time the screen takes to shut off automatically (p. 52). This also works when [Auto Power Down] is set to [Off]. z Touch [Power Saving]. z Drag up or down the screen to choose [Display Off], then touch qr to choose a time. z In order to save battery power, you should choose less than [1 min.]. Using the World Clock When traveling abroad, you can record images with local dates and times simply by switching the time zone setting.
Changing Camera Settings Choose the world time zone. World], then touch Ú. will appear in the [Time Zone] or shooting screen (p. 187). z Touch [ X If you change the date or time in the setting (p. 20), your [ time and date will automatically change. Home] Calibrating the Touch Panel You can calibrate the touch panel if you are having difficulty choosing items or buttons. Be sure to use the toggle attached to the strap to calibrate the touch panel accurately. z Touch [Calibration].
Changing Shooting Function Settings If you set the mode switch to 4, and the mode to G, you can change the settings in the 4 tab (p. 47). Before attempting to shoot using a function explained in this section in modes other than G, check if the function is available in those modes (pp. 196 – 197). Turning Off the AF Assist Beam The lamp will automatically light to assist focusing in low light conditions when you press the shutter button halfway. You can turn off the lamp.
Changing Shooting Function Settings Changing the Image Display Time Right After Shooting You can change the length of time the images display right after shooting. z Choose [Review], then touch qr to choose an option. 2 – 10 sec. Displays images for the set time. Hold The image displays until you press the shutter button halfway. Off Images will not display. Changing the Way the Image Displays Right After Shooting You can change the way the image displays right after shooting.
Changing Shooting Function Settings Grid lines will not be recorded on the image. Changing the IS-Mode Settings z Choose [IS Mode], then touch qr to choose an option. Continuous Image stabilization is always on. You can confirm the effects directly on the display, which makes it easier to check the composition or focus. When shooting movies, the camera also reduces strong camera shake, for example when walking (Dynamic mode). Shoot Only* Image stabilization is only active at the moment of shooting.
Changing Shooting Function Settings Changing Icon Order (Icon Layout) You can add icons to the shooting screen, or change their arrangement. Adding Icons Display the settings screen. z In a shooting screen, touch and hold one of the icons. z When [Changes which icons appear and their positions] appears, lift your finger off the screen once, then touch the center of the screen. X The setting screen shown to the left will appear. Add an icon.
Changing Shooting Function Settings Rearranging Icons z Drag the desired icon that appears in the layout screen in Step 1 on p. 174 to the position you want. X The icon will exchange places with any existing icon in that position. Removing Icons z When in the layout screen that appears in Step 1 on p. 174, drag the icon you want to remove to the center and then to that will appear on the lower part of the screen. z If you drag an icon that cannot be removed, will not appear.
Changing Playback Function Settings You can adjust the settings in the 1 tab by pressing the 1 button (p. 47). Turning Off Active Display You can turn off Active Display (pp. 29, 127) so that gently tapping the side of the camera or tilting the camera does not cause images to switch. z Choose [Active Display], then touch qr to choose [Off]. Choosing the Image that First Displays in Playback z Choose [Resume], then touch qr to choose an option. Last seen Resumes with the image last viewed.
11 Useful Information This chapter introduces how to use the AC adapter kit and Eye-Fi card (both sold separately), troubleshooting tips, and contains lists of functions and items that appear on the screen.
Using Household Power If you use AC Adapter Kit ACK-DC40 (sold separately), you can use the camera without worrying about how much charge is left in the battery. Turn off the camera. Insert the coupler. z Follow Step 2 on p. 17 to open the cover, then insert the coupler as shown until it locks into place with a click. z Follow Step 5 on p. 18 to close the cover. Terminal Plug the cord into the coupler. z Open the cover and fully insert the plug into the coupler. Connect the power cord.
Using an Eye-Fi Card Before using an Eye-Fi card, be sure to check whether Eye-Fi card use is authorized in the country or territory of use (p. 17). When you put a prepared Eye-Fi card into the camera, you can automatically transfer your images wirelessly to a computer, or upload them to a web service. Image transfer is a function of the Eye-Fi card.
Using an Eye-Fi Card • The power saving function does not work while transferring images (p. 52). • Choosing will interrupt the Eye-Fi connection. Choosing another Shooting mode or entering Playback mode will reopen the Eye-Fi connection, but movies made with may be transferred again. Checking Connection Information You can check the Eye-Fi card’s access point SSID, or connection status. Choose [Connection info]. z Touch ø, then n to choose the 3 tab, and touch [Eye-Fi Settings].
Troubleshooting If you think there is a problem with the camera, first check the following. If the items below do not solve your problem, contact a Canon Customer Support Help Desk as listed on the included customer support list. Power You pressed the ON/OFF button, but nothing happened. • • • • Confirm that the battery is the correct type, and is not depleted (p. 16). Confirm that the battery is properly inserted (p. 18). Confirm that the memory card/battery cover is securely closed (p. 18).
Troubleshooting Image is blurred. • Press the shutter button halfway to focus on the subject, then press fully to shoot (p. 24). • Shoot the subject within the focusing distance (p. 201). • Set the [AF-assist Beam] to [On] (p. 171). • Confirm that functions which you do not intend to use (macro, etc.) are not set. • Shoot using the focus lock or AF lock (pp. 96, 99). Even when you press the shutter button halfway, the AF frame does not appear, and the camera does not focus.
Troubleshooting Recording images to the memory card takes a long time, or continuous shooting slows down. • Perform a low-level format of the memory card in the camera (p. 165). Cannot make settings for shooting functions or FUNC. menu. • The items in which settings can be made differ depending on the shooting mode. Refer to “Functions Available in Each Shooting Mode” and “Shooting Menu” (pp. 192 – 197). Shooting Movies Correct shooting time does not display, or stops.
List of Messages That Appear on the Screen Computer Cannot transfer images to a computer. It may be possible to solve the problem when the camera is connected to a computer via cable by reducing the transfer speed. • Turn off the camera. Keep the shutter button pressed fully and move the zoom lever toward i, then press the 1 button. Now move the zoom lever toward j. Touch [B] in the screen that appears, then touch it again. Eye-Fi Card Cannot transfer images (p. 179).
List of Messages That Appear on the Screen Change the battery pack. (p. 17) No Image. • There are no images recorded on the memory card that can be displayed. Protected! (p. 137) Unidentified Image/Incompatible JPEG/Image too large./Cannot play back AVI/RAW • Unsupported images, or images with corrupted data cannot be displayed. • Images manipulated on a computer, that have had their file name changed, or have been taken with a different camera may not display.
List of Messages That Appear on the Screen Lens Error • This error can occur if you hold the lens while it is in motion or when using it in a location with excessive dust or sand in the air. • If this error message continues to appear, contact a Canon Customer Support Help Desk as there may be a problem with the lens. A camera error was detected (Error number) • If an error code appears directly after taking a picture, the shot may not have been recorded. Check the image in Playback mode.
Information Displayed on the Screen Shooting (Information Display) Shooting Mode (p. 192), Scene Icon (p. 188) Camera Orientation* White Balance (p. 86) My Colors (p. 92) Drive Mode (p. 91) Exposure Compensation Amount (p. 85) Camera Shake Warning (p. 26) FUNC. (Function) (p. 46) Battery Charge Indicator (p. 16) Compression (Image Quality) (p. 60) / Recording Pixels (pp. 60, 116) Eye-Fi Connection Status (p. 179) * Recordable Shots (p. 61) Image Quality (Movies) (p. 116) AF Frame (p.
Information Displayed on the Screen Scene Icons In A mode, the camera displays an icon for the scene it has determined and then automatically focuses and selects the optimum settings for subject brightness and color.
Information Displayed on the Screen Playback (Detailed Information Display) Index Display (p. 120) My Category (p. 143) Movies (p. 33), Highspeed Burst (p. 80), Shooting Mode (p. 192) ISO Speed (p. 88), Playback Speed (Movies) (p. 114) ND Filter (p. 27) White Balance (p. 86) Histogram (p. 45) Recording Pixels (pp. 60, 116), MOV (Movies) FUNC. (Function) (p. 46) Print List (p. 159) Eye-Fi Transfer Complete (p. 179) Battery Charge Indicator (p. 16) Metering Method (p. 101) Folder Number – File Number (p.
Information Displayed on the Screen Summary of Movie Control Panel in “Viewing Movies” (p. 33) Exit Touch to display the volume panel, then touch op to adjust the volume. When the volume is set to 0, will appear. Playback Skip backward* (Continues to skip backward if you keep touching the screen.) Previous frame (Slow rewind if you touch and hold the icon.) Next frame (Slow advance if you touch and hold the icon.) Skip forward* (Continues to skip forward if you keep touching the screen.) * Edit (p.
Handling Precautions • This camera is a high-precision electronic device. Do not drop it or subject it to strong impacts. • Never place the camera close to magnets, motors or other devices that generate strong electromagnetic fields. Exposure to strong magnetic fields may cause malfunctions or corrupt image data. • If water droplets or dirt become stuck on the camera or screen, wipe with a dry soft cloth or eyeglass wiper. Do not rub or apply force.
Functions Available in Each Shooting 4 Shooting Modes A Function Exposure Compensation (p. 85) Flash (pp. 54, 85) Self-Timer (pp. 58, 59) Self-Timer Settings (p.
Functions Available in Each Shooting Mode 4 TY w O P t { — { { { { { — { { — — { { { { — — — — { { { { — { { { { { { { — — — — — — — — { { { { { { { { { { { — — — — — — — — — — *2 — — — — — — — — — — { { { { { { { { { { { { { { { { — — { { { { { { { { { { { { { { { { { { — — { { { { { { { { { { { { { { { { — — { { { { { { { { { { { { { { { { — — { { { { {
Functions Available in Each Shooting Mode 4 Shooting Modes A Function G B M I V FUNC. Menu Metering Method (p. 101) { { { { { { { { { { — { { { { — — — — — { { { { { { { { { { — { { { { — — { { { { *1 My Colors (p.
Functions Available in Each Shooting Mode 4 TY w O P t FUNC.
Menus 4 Shooting Menu 4 Shooting Modes A Function G B M I V AiAF*1 { { { { { { { { { { Fixed frame — { { { { { { — — — Normal — { { { { { { — — — Small — { { { { { { — — — Standard { { { { { { { { { { Off { { { { { { { { { { Digital Tele-converter (1.5x/2.
Menus 4 TY w O P t { { { { — — { { { { { { { { { — { { { — — { { — { { { { { { { { { { { { { — — { { — { { { { { { { { { { { { { — — { — — { { { { { { { { { — { { — — — — — — — { { { { — { { { { { — { { { { { { { { { { { { { { { { { { — — — — — — — { { { { — { { { { — — — { { — { — — — { { { { { { { { — — { { { { { { { { { { { { { { { { { { —
Menus 3 Set up Menu Item Content Ref. Page Mute On/Off* Volume Set all operation sounds (5 levels). p. 49 p. 49 Sound Options Set the sounds for each camera operation. p. 164 Hints & Tips On*/Off p. 164 LCD Brightness Sets screen brightness (5 levels). p. 50 Start-up Image Add an image as a start-up image. p. 166 Color Option Orange*/Blue Gray/Khaki/Pink Format Formats memory card, erasing all data File Numbering Continuous*/Auto Reset p. 167 Create Folder Monthly*/Daily p.
Menus 1 Playback Menu Item Content Ref. Page Slideshow Plays back images automatically. p. 124 Erase Erases images (Select, All Images). p. 139 Protect Protects images (Select, All Images). p. 137 Rotate Rotates images. p. 144 Favorites Tags or untags images as favorites. p. 141 My Category Categorizes images. p. 143 i-Contrast Corrects dark portions and contrast in still images. p. 149 Red-Eye Correction Corrects red eyes in still images. p.
Playback Mode FUNC. Menu Item Content Ref. Page Rotate Rotates displayed image. p. 144 Print List Selects or clears settings for printing displayed image ([Print] appears when the camera is connected to the printer). p. 159 Protect Protects/unlocks displayed image. p. 137 Favorites Tags/untags displayed image as favorites. p. 141 Erase Erases displayed image. p. 139 Movie Digest Playback Plays back movies made in the Movie Digest mode. p. 122 Smart Shuffle Starts Smart Shuffle. p.
Specifications Image Sensor Camera Effective Pixels ..................Approx. 12.1 million pixels Lens Focal Length ...................................4.4x zoom: 4.3 (W) – 18.8 (T) mm (35mm film equivalent: 24 (W) – 105 (T) mm) Focusing Range ..............................3 cm (1.2 in.) – infinity (W), 40 cm (1.3 ft.) – infinity (T) • Macro 3 – 50 cm (W) (1.2 in. – 1.6 ft. (W)) Image Stabilizer System......................Lens-shift type Imaging Processor ..............................
Specifications Shooting Modes .................................. Auto*1, P, Av, Tv, Movie Digest, Portrait, Kids&Pets, Smart Shutter*2, High-speed Burst, Best Image Selection, Handheld Night Scene, Low Light, Fish-eye Effect, Miniature Effect, Toy Camera Effect, Creative Light Effect, Monochrome, Super Vivid, Poster Effect, Color Accent, Color Swap, Beach, Foliage, Snow, Fireworks, iFrame Movie, Super Slow Motion Movie • Movies are recorded by pressing the movie button.
Specifications Movies .............................................Super Slow Motion Movie: 640 x 480 (120 fps*1 when shooting, 30 fps*2 during playback), 320 x 240 (240 fps*3 when shooting, 30 fps*2 during playback) Miniature Effect: 1280 x 720*4, 640 x 480*4 iFrame Movie: 1280 x 720 (30 fps*2) Movies other than the above: 1920 x 1080 pixels (24 fps*5), 1280 x 720 (30 fps*2), 640 x 480 (30 fps*2), 320 x 240 (30 fps*2) *1 Actual frame rate is 119.88 fps. *2 Actual frame rate is 29.97 fps.
Specifications Battery Pack NB-6L Format ................................................. Rechargeable Lithium-ion Battery Pack Nominal Voltage .................................. 3.7 V DC Nominal Capacity ................................ 1000 mAh Charging Cycles .................................. Approx. 300 times Operating Temperatures ..................... 0 – 40 °C (32 – 104 °F) Dimensions.......................................... 34.4 x 41.8 x 6.9 mm (1.35 x 1.65 x 0.27 in.) Weight ...................
Index A AC Adapter Kit................................. 39, 178 Accessories ............................................. 39 Active Display .................................. 29, 176 AE Lock ................................................. 102 AF Frames......................................... 26, 95 AF J Focus AF Lock ........................................... 99, 187 AF-Point Zoom ........................................ 97 Aspect Ratio ............................................
Index AF Lock ............................................ 99 AF-Point Zoom ................................. 97 Servo AF......................................... 100 Touch AF .......................................... 98 Focus Check ......................................... 126 Focus Lock .............................................. 96 Focusing Range Infinity ............................................... 94 Macro................................................ 94 Foliage (Shooting Mode) ...............
Index R T Recording Pixels (Image Size) ................ 60 Red-Eye Correction ....................... 104, 150 Resizing (Making Images Smaller)........ 145 Rotate .................................................... 144 Tag Images as Favorites ....................... 141 Terminal................... 36, 133, 134, 152, 178 Toggle...................................................... 14 Touch....................................................... 14 Touch Actions................................
Disclaimer • Reprinting, transmitting, or storing in a retrieval system any part of this guide without the permission of Canon is prohibited. • Canon reserves the right to change the contents of this guide at any time without prior notice. • Illustrations and screenshots in this guide may differ slightly from the actual equipment. • The above items notwithstanding, Canon accepts no liability for damages due to mistaken operation of the products.
